DOCS-IF3-MIB DEFINITIONS ::= BEGIN IMPORTS NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI -- RFC 2578 sysName FROM SNMPv2-MIB -- RFC 3418 TEXTUAL-CONVENTION, RowStatus, TruthValue, MacAddress, DateAndTime, StorageType FROM SNMPv2-TC -- RFC 2579 OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- RFC 2580 SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 SnmpTagList FROM SNMP-TARGET-MIB -- RFC 3413 InetAddressIPv6, InetAddressIPv4 FROM INET-ADDRESS-MIB -- RFC 4001 ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB -- RFC 2863 TenthdB, TenthdBmV, DocsisUpstreamType, DocsEqualizerData, DocsisQosVersion FROM DOCS-IF-MIB -- RFC 4546 NodeName FROM CLAB-TOPO-MIB docsDevEvLevel, docsDevEvId, docsDevEvText, docsDevEvLastTime FROM DOCS-CABLE-DEVICE-MIB -- RFC 4639 clabProjDocsis FROM CLAB-DEF-MIB; docsIf3Mib MODULE-IDENTITY LAST-UPDATED "201605050000Z" -- May 5, 2016 ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO " Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: mibs@cablelabs.com" DESCRIPTION "This MIB module contains the management objects for the management of DOCSIS 3.0 features, primarily channel bonding, interface topology and enhanced signal quality monitoring. Copyright 1999-2016 Cable Television Laboratories, Inc. All rights reserved." REVISION "201605050000Z" -- May 5, 2016 DESCRIPTION "Revised Version includes ECNs CCAP-OSSIv3.1-N-1509-1 and OSSIv3.0-N-15.1398-1; supersedes CCAP-OSSIv3.1-N-16.1431-1" REVISION "201505200000Z" -- May 20, 2015 DESCRIPTION "Revised Version includes ECN CM-OSSIv3.1-N-15.1309-1" REVISION "201504080000Z" -- April 8, 2015 DESCRIPTION "Revised Version includes ECN CM-OSSIv3.1-N-14.1222-3" REVISION "201311190000Z" -- November 20, 2013 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-13.1119-3 and published as I22" REVISION "201304040000Z" -- April 4, 2013 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-12.1083 and OSSIv3.0-N-13.1093 and published as I21" REVISION "201211130000Z" -- November 13, 2012 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-12.1079-4 and published as I20" REVISION "201208090000Z" -- August 9, 2012 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-12.1064-3 and published as I19" REVISION "201102100000Z" -- February 10, 2011 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-10.0962-5 and OSSIv3.0-N-10.0984-1 and published as I14" REVISION "201006110000Z" -- June 11, 2010 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-10.0906-2 and published as I12" REVISION "201001150000Z" -- January 15, 2010 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-09.0871-4 OSSIv3.0-N-09.0872-4 OSSIv3.0-N-09.0881-3 and published as I11" REVISION "200905290000Z" -- May 29, 2009 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-09.0775-3 and published as I09" REVISION "200901210000Z" -- January 21, 2009 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-08.0651-3 OSSIv3.0-N-08.0700-4 and published as I08" REVISION "200805220000Z" -- May 22, 2008 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-08.0645-4 and published as I07" REVISION "200802150000Z" DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-07.0605-1 and published as I06" REVISION "200712060000Z" -- December 6, 2007 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-07.0522-6 OSSIv3.0-N-07.0554-4 and published as I05" REVISION "200708030000Z" -- August 3, 2007 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-07.0481-2 OSSIv3.0-N-07.0480-3 and published as I04" REVISION "200705180000Z" -- May 18, 2007 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-07.0447-2 OSSIv3.0-N-07.0446-4 OSSIv3.0-N-07.0445-3 OSSIv3.0-N-07.0441-4 OSSIv3.0-N-07.0422-5 OSSIv3.0-N-07.0413-3 OSSIv3.0-N-07.0410-4 OSSIv3.0-N-07.0392-1 OSSIv3.0-N-07.0384-1 OSSIv3.0-N-06.0357-1 and published as I03" REVISION "200702230000Z" -- February 23, 2007 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-06.0357-1 and published as IO2" REVISION "200612071700Z" -- December 7, 2006 DESCRIPTION "Initial version, published as part of the CableLabs OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207" ::= { clabProjDocsis 20 } -- Textual Conventions CmRegState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type defines the CM connectivity state as reported by the CM. The enumerated values associated with the CmRegState are: 'other' indicates any state not described below. 'notReady' indicates that the CM has not started the registration process yet. 'notSynchronized' indicates that the CM has not initiated or completed the synchronization of the downstream physical layer 'phySynchronized' indicates that the CM has completed the synchronization of the downstream physical layer 'dsTopologyResolutionInProgress' indicates that the CM is attempting to determine its MD-DS-SG 'usParametersAcquired' indicates that the CM has completed the upstream parameters acquisition or have completed the downstream and upstream service groups resolution, whether the CM is registering in a pre-3.0 or a 3.0 CMTS. 'rangingInProgress' indicates that the CM has initiated the ranging process. 'rangingComplete' indicates that the CM has completed initial ranging and received a Ranging Status of success from the CMTS in the RNG-RSP message. 'eaeInProgress' indicates that the CM has sent an Auth Info message for EAE. 'dhcpv4InProgress' indicates that the CM has sent a DHCPv4 DISCOVER to gain IP connectivity. 'dhcpv6InProgress' indicates that the CM has sent an DHCPv6 Solicit message. 'dhcpv4Complete' indicates that the CM has received a DHCPv4 ACK message from the CMTS. 'dhcpv6Complete' indicates that the CM has received a DHCPv6 Reply message from the CMTS. 'todEstablished' indicates that the CM has successfully acquired time of day. If the ToD is acquired after the CM is operational, this value should not be reported. 'securityEstablished' indicates that the CM has successfully completed the BPI initialization process. 'configFileDownloadComplete' indicates that the CM has completed the config file download process. 'registrationInProgress' indicates that the CM has sent a Registration Request (REG-REQ or REG-REQ-MP) 'registrationComplete' indicates that the CM has successfully completed the Registration process with the CMTS. 'accessDenied' indicates that the CM has received a registration aborted notification from the CMTS 'operational' indicates that the CM has completed all necessary initialization steps and is operational. 'bpiInit' indicates that the CM has started the BPI initialization process as indicated in the CM config file. If the CM already performed EAE, this state is skipped by the CM. 'forwardingDisabled' indicates that the registration process was completed, but the network access option in the received configuration file prohibits forwarding. 'rfMuteAll' indicates that the CM is instructed to mute all channels in the CM-CTRL-REQ message from CMTS." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Cable Modem - CMTS Interaction section." SYNTAX INTEGER {other(1), notReady(2), notSynchronized(3), phySynchronized(4), dsTopologyResolutionInProgress(21), usParametersAcquired(5), rangingInProgress(22), rangingComplete(6), eaeInProgress(14), dhcpv4InProgress(15), dhcpv6InProgress(16), dhcpv4Complete(7), dhcpv6Complete(17), todEstablished(8), securityEstablished(9), configFileDownloadComplete(10), registrationInProgress(18), registrationComplete(11), accessDenied(13), operational(12), bpiInit (19), forwardingDisabled(20), rfMuteAll(23) } CmtsCmRegState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type defines the CM connectivity states as reported by the CMTS. The enumerated values associated with the CmtsCmRegState are: 'other' indicates any state not described below. 'initialRanging' indicates that the CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. 'rangingAutoAdjComplete' indicates that the CM has completed initial ranging and the CMTS sends a Ranging Status of success in the RNG-RSP. 'startEae' indicates that the CMTS has received an Auth Info message for EAE from the CM. 'startDhcpv4' indicates that the CMTS has received a DHCPv4 DISCOVER message from the CM. 'startDhcpv6' indicates that the CMTS has received a DHCPv6 Solicit message from the CM. 'dhcpv4Complete' indicates that the CMTS has sent a DHCPv4 ACK message to the CM. 'dhcpv6Complete' indicates that the CMTS has sent a DHCPv6 Reply message to the CM. 'startConfigFileDownload' indicates that the CM has started the config file download. If the TFTP Proxy feature is not enabled, the CMTS may not report this state. 'configFileDownloadComplete' indicates that the CM has completed the config file download process. If the TFTP Proxy feature is not enabled, the CMTS is not required to report this state. 'startRegistration' indicates that the CMTS has received a Registration Request (REG-REQ or REG-REQ-MP) from the CM. 'registrationComplete' indicates that the CMTS has received a Registration Acknowledge (REG-ACK) with a confirmation code of okay/success. 'operational' indicates that the CM has completed all necessary initialization steps and is operational. 'bpiInit' indicates that the CMTS has received an Auth Info or Auth Request message as part of BPI Initialization. 'forwardingDisabled' indicates that the registration process was completed, but the network access option in the received configuration file prohibits forwarding. 'rfMuteAll' indicates that the CM is instructed to mute all channels in the CM-CTRL-REQ message from CMTS." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Cable Modem - CMTS Interaction section." SYNTAX INTEGER {other (1), initialRanging(2), rangingAutoAdjComplete(4), startEae(10), startDhcpv4 (11), startDhcpv6(12), dhcpv4Complete(5), dhcpv6Complete(13), startConfigFileDownload(14), configFileDownloadComplete(15), startRegistration(16), registrationComplete(6), operational (8), bpiInit(9), forwardingDisabled(17), rfMuteAll(18) } ScdmaSelectionString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type represents the S-CDMA selection string for active codes used with Selectable Active Codes Mode 2. A 128-bit string indicating which codes are active. The first element in the string corresponds to code 0 (the all-ones code), and the last element in the string corresponds to code 127. A '1' element in the string indicates an active code, and a '0' indicates an unused code. A zero-length string is returned for an unknown or non-applicable value." REFERENCE "DOCSIS 3.0 Physical Layer Specification CM-SP-PHYv3.0-I05-070803, Mini-slot Numbering Parameters in UCD section." SYNTAX OCTET STRING (SIZE(0 | 16)) AmplitudeData ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type represents a sequence of spectral amplitudes. Each spectral amplitude value corresponds to a bin. The format of the bin measurement is as follows. Sequence of: 4 bytes: ChCenterFreq The center frequency of the upstream channel. 4 bytes: FreqSpan The width in Hz of the band across which the spectral amplitudes characterizing the channel are measured. 4 bytes: NumberOfBins The number of data points or bins that compose the spectral data. The leftmost bin corresponds to the lower band edge, the rightmost bin corresponds to the upper band edge, and the middle bin center is aligned with the center frequency of the analysis span. 4 bytes: BinSpacing The frequency separation between adjacent bin centers. It is derived from the frequency span and the number of bins or data points. The bin spacing is computed as: BinSpacing = FrequencySpan/(NumberOfBins -1) The larger the number of bins the finer the resolution. 4 bytes: ResolutionBW The resolution bandwidth or equivalent noise bandwidth of each bin. If spectral windowing is used (based on vendor implementation), the bin spacing and resolution bandwidth would not generally be the same. n bytes: Amplitude (2 bytes * NumberOfBins) A sequence of two byte elements. Each element represents the spectral amplitudes in relation to the expected received signal power of a bin, in units of 0.01dB. That is, a test CMTS input signal with square-root raised-cosine spectrum, bandwidth equal to the expected received signal bandwidth, and power equal to the expected received signal power, which is present for the entire spectrum sampling period, will exhibit a spectrum measurement of 0 dB average power in each bin of the signal passband. Each bin element amplitude value format is 2's complement which provides a range of -327.68 dB to 327.67 dB amplitude value for the bin measurement." SYNTAX OCTET STRING (SIZE(0 | 2..4116)) SpectrumAnalysisWindowFunction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object controls the windowing function which will be used when performing the discrete fourier transform for the analysis. Note that all window functions may not be supported by all devices. If an attempt is made to set the object to an unsupported window function, an error of inconsistentValue will be returned." REFERENCE "Harris, Fredric J. (Jan 1978). 'On the use of Windows for Harmonic Analysis with the Discrete Fourier Transform'. Proceedings of the IEEE, Vol 66, Issue 1, Jan 1978 doi:10.1109/PROC.1978.10837" SYNTAX INTEGER { other(0), hann(1), blackmanHarris(2), rectangular(3), hamming(4), flatTop(5), gaussian(6), chebyshev(7) } Tlv8 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type represents a single TLV encoding. This first octet represents the Type of the TLV. The second octet represents an unsigned 8-bit Length of the subsequent Value part of the TLV. The remaining octets represent the value. The Value could be an atomic value or a sequence of one or more sub-TLVs." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Common Radio Frequency Interface Encodings Annex." SYNTAX OCTET STRING (SIZE(0 | 2..255)) ChId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "This data type is an 8-bit number that represents a provisioned Downstream Channel ID (DCID) or a provisioned Upstream Channel ID (UCID). A Channel Id is unique per direction within a MAC Domain. The value zero is reserved for use when the channel ID is unknown." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Upstream Channel Descriptor (UCD) section." SYNTAX Unsigned32 (0..255) ChSetId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "This data type is a CMTS-derived unique number within a MAC Domain used to reference a Channel Set within the CMTS. Values in the range of 1 to 255 define a single-channel Channel Set and correspond to either the Downstream Channel ID (DCID) or an Upstream Channel ID (UCID) of that channel. Values greater than 255 indicate a Channel Set consisting of two or more channels in the same direction within the MAC Domain. The value zero is reserved for use when the Channel Set is unknown." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Channel Bonding section." SYNTAX Unsigned32 ChannelList ::= TEXTUAL-CONVENTION DISPLAY-HINT "1d," STATUS current DESCRIPTION "This data type represents a unique set of channel IDs in either the upstream or the downstream direction. Each octet represents a UCID or DCID depending on the direction of the channels within the list. The CMTS must ensure that this combination of channels is unique per direction within the MAC Domain. In order to facilitate Channel ID combinatorial uniqueness across all channel lists, a query to retrieve the value of an attribute of this type, returns the set of channels in the channel list in ascending order of Channel Ids." SYNTAX OCTET STRING (SIZE (0..255)) AttributeMask ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type consists of a sequence of 32-bit positions used to select the bonding group or the channel to which a service flow is assigned. DOCSIS defines three types of Attribute Masks for which this type applies: The Provisionied Attribute Mask that is configured to a Bonding Group or a single-channel, whereas the Required Attribute and the Forbidden Attribute Mask are part of the Service Flow QOS Parameter Set to be matched with the Provisioned Attribute Mask of CMTS-configured Bonding Groups or single-channels. DOCSIS reserves the assignment of the meaning of the first 8 bit positions (left to right) as follows: Bit 0: 'bonding' Bit 1: 'lowLatency' Bit 2: 'highAvailability' Bit positions 3-15 are reserved. Bit positions 16-31 are freely assigned by operators to represent their own constraints on the channel(s) selection for a particular service flow." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Service Flow Assignment section." SYNTAX BITS { bonding(0), lowLatency(1), highAvailability(2) } AttrAggrRuleMask ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type represents a sequence of 32-bit positions that defines logical (e.g., AND, OR) operations to match against the channel list Provisioned Mask and Service Flow Required Mask bit positions when the CMTS is determining the service flow for assignment to a bonding group not configured by the management system." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Service Flow Assignment section." SYNTAX OCTET STRING (SIZE (4)) RcpId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type defines a 'Receive Channel Profile Identifier' (RCP-ID). An RCP-ID consists of 5-octet length string where the first 3-bytes (from left to right corresponds to the Organizational Unique ID (OUI) followed by a two-byte vendor-maintained identifier to represent multiple versions or models of RCP-IDs." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, RCP-ID section in the Common Radio Frequency Interface Encodings Annex." SYNTAX OCTET STRING (SIZE (5)) Dsid ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "This data type defines the 20-bit Downstream Service Identifier (DSID) used by the CM for downstream resequencing, filtering, and forwarding. The value zero is reserved for use when the DSID is unknown or does not apply." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, DSID Definition section." SYNTAX Unsigned32 (0..1048575) RangingState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type defines the CM ranging state as reported by the CMTS. The enumerated values associated with the RangingState are: 'other' indicates any state not described below. 'aborted' indicates that the CMTS has sent a ranging abort. 'retriesExceeded' indicates that the CM ranging retry limit has exceeded. 'success' indicates that the CMTS has sent a ranging success in the ranging response. 'continue' indicates that the CMTS has sent a ranging continue in the ranging response. 'timeoutT4' indicates that the T4 timer expired on the CM." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Cable Modem - CMTS Interaction section." SYNTAX INTEGER {other(1), aborted(2), retriesExceeded(3), success(4), continue(5), timeoutT4(6) } IfDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates a direction on an RF MAC interface. The value downstream(1) is from Cable Modem Termination System to Cable Modem. The value upstream(2) is from Cable Modem to Cable Modem Termination System." SYNTAX INTEGER { downstream(1), upstream(2) } -- Object Definitions docsIf3Notifications OBJECT IDENTIFIER ::= { docsIf3Mib 0 } docsIf3MibObjects OBJECT IDENTIFIER ::= { docsIf3Mib 1 } -- Notifications -- CMTS Notifications docsIf3CmtsEventNotif NOTIFICATION-TYPE OBJECTS { docsDevEvLevel, docsDevEvId, docsDevEvText, docsDevEvLastTime, sysName } STATUS current DESCRIPTION "A notification to report a DOCSIS event detected on the CMTS. This notification includes the following information: - docsDevEvLevel: the DOCSIS priority level associated with the event. - docsDevEvId: the numeric identifier of the event. - docsDevEvText: The text description of the event. - docsDevEvLastTime: The local date and time when this event was generated. - sysName: the administratively-assigned name of the CMTS. e.g., The fully-qualified domain name as indicated in RFC 3418 or in the absence the IP address of the CMTS administrative interface in dot '.' notation for IPv4 and colon ':' notation for and IPv6 Address as indicated in RFC 3164" REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I07-080522, Format and Content for Event, Syslog, and SNMP Notification Annex. RFC 3418, RFC 3164" ::= { docsIf3Notifications 1 } -- CM Notifications docsIf3CmEventNotif NOTIFICATION-TYPE OBJECTS { docsDevEvLevel, docsDevEvId, docsDevEvText, docsDevEvLastTime } STATUS current DESCRIPTION "A notification to report a DOCSIS event detected on the CM. This notification includes the following information: - docsDevEvLevel: the priority level associated with the event. - docsDevEvId: the unique identifier of the event that occurred. - docsDevEvText: a textual description of the event. - docsDevEvLastTime: The local date and time when this event was generated." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I07-080522, Format and Content for Event, Syslog, and SNMP Notification Annex." ::= { docsIf3Notifications 2 } docsIf3CmStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines attributes of the CM connectivity status. This object provides CM connectivity status information of the CM previously available in the SNMP table docsIfCmStatusTable." REFERENCE "RFC 4546" ::= { docsIf3MibObjects 1} docsIf3CmStatusEntry OBJECT-TYPE SYNTAX DocsIf3CmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmStatusTable. An instance exist for the CM MAC Domain Interface." INDEX { ifIndex } ::= { docsIf3CmStatusTable 1 } DocsIf3CmStatusEntry ::= SEQUENCE { docsIf3CmStatusValue CmRegState, docsIf3CmStatusCode OCTET STRING, docsIf3CmStatusResets Counter32, docsIf3CmStatusLostSyncs Counter32, docsIf3CmStatusInvalidMaps Counter32, docsIf3CmStatusInvalidUcds Counter32, docsIf3CmStatusInvalidRangingRsps Counter32, docsIf3CmStatusInvalidRegRsps Counter32, docsIf3CmStatusT1Timeouts Counter32, docsIf3CmStatusT2Timeouts Counter32, docsIf3CmStatusUCCsSuccesses Counter32, docsIf3CmStatusUCCFails Counter32, docsIf3CmStatusEnergyMgt1x1OperStatus TruthValue } docsIf3CmStatusValue OBJECT-TYPE SYNTAX CmRegState MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the current CM connectivity state. For the case of IP acquisition related states, this attribute reflects states for the current CM provisioning mode, not the other DHCP process associated with dual stack operation." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Establishing IP Connectivity section." ::= { docsIf3CmStatusEntry 1 } docsIf3CmStatusCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE( 0 | 5 | 6 | 7 )) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the status code for CM as defined in the OSSI Specification. The status code consists of a single character indicating error groups, followed by a two- or three-digit number indicating the status condition, followed by a decimal. An example of a returned value could be 'T101.0'. The zero-length hex string indicates no status code yet registered." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I09-090529, Format and Content for Event, Syslog, and SNMP Notification Annex." ::= { docsIf3CmStatusEntry 2 } docsIf3CmStatusResets OBJECT-TYPE SYNTAX Counter32 UNITS "resets" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times the CM reset or initialized this interface. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 3 } docsIf3CmStatusLostSyncs OBJECT-TYPE SYNTAX Counter32 UNITS "messages" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times the CM lost synchronization with the downstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 4 } docsIf3CmStatusInvalidMaps OBJECT-TYPE SYNTAX Counter32 UNITS "maps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times the CM received invalid MAP messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 5 } docsIf3CmStatusInvalidUcds OBJECT-TYPE SYNTAX Counter32 UNITS "messages" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times the CM received invalid UCD messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 6 } docsIf3CmStatusInvalidRangingRsps OBJECT-TYPE SYNTAX Counter32 UNITS "messages" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times the CM received invalid ranging response messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 7 } docsIf3CmStatusInvalidRegRsps OBJECT-TYPE SYNTAX Counter32 UNITS "messages" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times the CM received invalid registration response messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 8 } docsIf3CmStatusT1Timeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times counter T1 expired in the CM. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 9 } docsIf3CmStatusT2Timeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times counter T2 expired in the CM. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 10 } docsIf3CmStatusUCCsSuccesses OBJECT-TYPE SYNTAX Counter32 UNITS "attempts" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This attribute denotes the number of successful Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 11 } docsIf3CmStatusUCCFails OBJECT-TYPE SYNTAX Counter32 UNITS "attempts" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This attribute denotes the number of failed Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." REFERENCE "RFC 2863." ::= { docsIf3CmStatusEntry 12 } docsIf3CmStatusEnergyMgt1x1OperStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the CM is currently operating in Energy Management 1x1 Mode. If this attribute returns 'true', the CM is operating in Energy Management 1x1 Mode." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I20-121155, Energy Management Mode Indicator section." ::= { docsIf3CmStatusEntry 13 } docsIf3CmStatusUsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmStatusUsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines PHY and MAC information about the CM's upstream channels operating in Multiple Transmit Channel (MTC) mode or in a Pre-3.0 DOSCIS transmit channel mode. This object provides per-CM Upstream channel information previously available in the SNMP table docsIfCmStatusTable." ::= { docsIf3MibObjects 2} docsIf3CmStatusUsEntry OBJECT-TYPE SYNTAX DocsIf3CmStatusUsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmStatusUsTable. An instance exist for each of the CM's SC-QAM upstream channels which are configured for data transmission." INDEX { ifIndex } ::= { docsIf3CmStatusUsTable 1 } DocsIf3CmStatusUsEntry ::= SEQUENCE { docsIf3CmStatusUsTxPower TenthdBmV, docsIf3CmStatusUsT3Timeouts Counter32, docsIf3CmStatusUsT4Timeouts Counter32, docsIf3CmStatusUsRangingAborteds Counter32, docsIf3CmStatusUsModulationType DocsisUpstreamType, docsIf3CmStatusUsEqData DocsEqualizerData, docsIf3CmStatusUsT3Exceededs Counter32, docsIf3CmStatusUsIsMuted TruthValue, docsIf3CmStatusUsRangingStatus RangingState } docsIf3CmStatusUsTxPower OBJECT-TYPE SYNTAX TenthdBmV UNITS "TenthdBmV" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the operational CM transmit power for this SC-QAM upstream channel. In order for this attribute to provide consistent information under all circumstances, a 3.1 CM will report the average total power for the SC-QAM channel the same as was done for DOCSIS 3.0, regardless of whether it is operating with a 3.1 or a 3.0 CMTS. The value that is reported was referred to as Pr in the DOCSIS 3.0 PHY Spec. This attribute is not applicable for OFDMA channels." ::= { docsIf3CmStatusUsEntry 1 } docsIf3CmStatusUsT3Timeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times counter T3 expired in the CM for this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel." REFERENCE "RFC 2863." ::= { docsIf3CmStatusUsEntry 2 } docsIf3CmStatusUsT4Timeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times counter T4 expired in the CM for this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel." REFERENCE "RFC 2863." ::= { docsIf3CmStatusUsEntry 3 } docsIf3CmStatusUsRangingAborteds OBJECT-TYPE SYNTAX Counter32 UNITS "attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times the ranging process was aborted by the CMTS. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime ([RFC2863]) for the associated upstream channel." REFERENCE "RFC 2863." ::= { docsIf3CmStatusUsEntry 4 } docsIf3CmStatusUsModulationType OBJECT-TYPE SYNTAX DocsisUpstreamType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates modulation type status currently used by the CM for this upstream channel. Since this object specifically identifies PHY Layer mode, the shared upstream channel type 'tdmaAndAtdma' is not permitted." REFERENCE "RFC 2863." ::= { docsIf3CmStatusUsEntry 5 } docsIf3CmStatusUsEqData OBJECT-TYPE SYNTAX DocsEqualizerData MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the pre-equalization data for the specified upstream Channel on this CM after convolution with data indicated in the RNG-RSP. This data is valid when docsIfUpChannelPreEqEnable RFC 4546 is set to true." REFERENCE "RFC 2863. RFC 4546." ::= { docsIf3CmStatusUsEntry 6 } docsIf3CmStatusUsT3Exceededs OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the number of times for excessive T3 timeouts. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel." REFERENCE "RFC 2863." ::= { docsIf3CmStatusUsEntry 7 } docsIf3CmStatusUsIsMuted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes whether the upstream channel is muted." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522 section Media Access Control specification." ::= { docsIf3CmStatusUsEntry 8 } docsIf3CmStatusUsRangingStatus OBJECT-TYPE SYNTAX RangingState MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the ranging state of the CM." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, section Media Access Control specification." ::= { docsIf3CmStatusUsEntry 9 } docsIf3CmtsCmRegStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmtsCmRegStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines attributes that represent the CM's registration status as tracked by the CMTS. Refer to the individual attribute definitions for applicability to 3.0 and 3.1 Cable Modems." ::= { docsIf3MibObjects 3} docsIf3CmtsCmRegStatusEntry OBJECT-TYPE SYNTAX DocsIf3CmtsCmRegStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmtsCmRegStatusTable." INDEX { docsIf3CmtsCmRegStatusId } ::= { docsIf3CmtsCmRegStatusTable 1 } DocsIf3CmtsCmRegStatusEntry ::= SEQUENCE { docsIf3CmtsCmRegStatusId Unsigned32, docsIf3CmtsCmRegStatusMacAddr MacAddress, docsIf3CmtsCmRegStatusIPv6Addr InetAddressIPv6, docsIf3CmtsCmRegStatusIPv6LinkLocal InetAddressIPv6, docsIf3CmtsCmRegStatusIPv4Addr InetAddressIPv4, docsIf3CmtsCmRegStatusValue CmtsCmRegState, docsIf3CmtsCmRegStatusMdIfIndex InterfaceIndexOrZero, docsIf3CmtsCmRegStatusMdCmSgId Unsigned32, docsIf3CmtsCmRegStatusRcpId RcpId, docsIf3CmtsCmRegStatusRccStatusId Unsigned32, docsIf3CmtsCmRegStatusRcsId ChSetId, docsIf3CmtsCmRegStatusTcsId ChSetId, docsIf3CmtsCmRegStatusQosVersion DocsisQosVersion, docsIf3CmtsCmRegStatusLastRegTime DateAndTime, docsIf3CmtsCmRegStatusAddrResolutionReqs Counter32, docsIf3CmtsCmRegStatusEnergyMgtEnabled BITS, docsIf3CmtsCmRegStatusEnergyMgtOperStatus BITS } docsIf3CmtsCmRegStatusId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute uniquely identifies a CM. The CMTS must assign a single id value for each CM MAC address seen by the CMTS. The CMTS should ensure that the association between an Id and MAC Address remains constant during CMTS uptime." ::= { docsIf3CmtsCmRegStatusEntry 1 } docsIf3CmtsCmRegStatusMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the MAC address of the CM. If the CM has multiple MAC addresses, this is the MAC address associated with the MAC Domain interface." ::= { docsIf3CmtsCmRegStatusEntry 2 } docsIf3CmtsCmRegStatusIPv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the IPv6 address of the CM. If the CM has no Internet address assigned, or the Internet address is unknown, the value of this attribute is the all zeros address." ::= { docsIf3CmtsCmRegStatusEntry 3 } docsIf3CmtsCmRegStatusIPv6LinkLocal OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the IPv6 local scope address of the CM. If the CM has no link local address assigned, or the Internet address is unknown, the value of this attribute is the all zeros address." ::= { docsIf3CmtsCmRegStatusEntry 4 } docsIf3CmtsCmRegStatusIPv4Addr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the IPv4 address of this CM. If the CM has no IP address assigned, or the IP address is unknown, this object returns 0.0.0.0." ::= { docsIf3CmtsCmRegStatusEntry 5 } docsIf3CmtsCmRegStatusValue OBJECT-TYPE SYNTAX CmtsCmRegState MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the current CM connectivity state." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Cable Modem Initialization and Reinitialization section." ::= { docsIf3CmtsCmRegStatusEntry 6 } docsIf3CmtsCmRegStatusMdIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the interface Index of the CMTS MAC Domain where the CM is active. If the interface is unknown, the CMTS returns a value of zero." ::= { docsIf3CmtsCmRegStatusEntry 7 } docsIf3CmtsCmRegStatusMdCmSgId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the ID of the MAC Domain CM Service Group Id (MD-CM-SG-ID) in which the CM is registered. If the ID is unknown, the CMTS returns a value of zero." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Cable Modem Service Group (CM-SG) section." ::= { docsIf3CmtsCmRegStatusEntry 8 } docsIf3CmtsCmRegStatusRcpId OBJECT-TYPE SYNTAX RcpId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the RCP-ID associated with the CM if the CM is in DOCSIS 3.0 mode. If the RCP-ID is unknown or the CM is in DOCSIS 3.1 mode, the CMTS returns a five octet long string of zeros." REFERENCE -- Update reference to 3.1 MULPI "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, RCP-ID section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3CmtsCmRegStatusEntry 9 } docsIf3CmtsCmRegStatusRccStatusId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the RCC Id the CMTS used to configure the CM receive channel set during the registration process, if the CM is in DOCSIS 3.0 mode. If unknown or the CM is in DOCSIS 3.1 mode, the CMTS returns the value zero." ::= { docsIf3CmtsCmRegStatusEntry 10 } docsIf3CmtsCmRegStatusRcsId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Receive Channel Set (RCS) that the CM is currently using. If the RCS is unknown, the CMTS returns the value zero." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Cable Modem Physical Receive Channel Configuration section and the Receive Channels section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3CmtsCmRegStatusEntry 11 } docsIf3CmtsCmRegStatusTcsId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents Transmit Channel Set (TCS) the CM is currently using. If the TCS is unknown, the CMTS returns the value zero." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Changes to the Transmit Channel Set section." ::= { docsIf3CmtsCmRegStatusEntry 12 } docsIf3CmtsCmRegStatusQosVersion OBJECT-TYPE SYNTAX DocsisQosVersion MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the queuing services the CM registered, either DOCSIS 1.1 QoS or DOCSIS 1.0 CoS mode." ::= { docsIf3CmtsCmRegStatusEntry 13 } docsIf3CmtsCmRegStatusLastRegTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the last time the CM registered." ::= { docsIf3CmtsCmRegStatusEntry 14 } docsIf3CmtsCmRegStatusAddrResolutionReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of upstream packets received on the SIDs assigned to a CM that are any of the following: Upstream IPv4 ARP Requests Upstream IPv6 Neighbor Solicitation Requests (For Routing CMTSs) Upstream IPv4 or IPv6 packets to unresolved destinations in locally connected downstream subnets in the HFC. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated MAC Domain interface." REFERENCE "DOCSIS 3.0 Security Specification CM-SP-SECv3.0-I13-100611, Secure Provisioning section. RFC 2863." ::= { docsIf3CmtsCmRegStatusEntry 15 } docsIf3CmtsCmRegStatusEnergyMgtEnabled OBJECT-TYPE SYNTAX BITS { em1x1Mode(0), dlsMode(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates which, if any, of the Energy Management Features are enabled for this CM. If this attribute returns the em1x1Mode(0) bit set, the CM is configured with the Energy Management 1x1 Feature enabled. If this attribute returns the dlsMode(1) bit set, the CM is configured with the DLS Feature enabled. If this attribute returns all bits cleared, the CM will not request to operate in any Energy Management mode of operation. Note: This attribute only indicates if an Energy Management Feature is enabled/disabled via the CM config file and registration request/response exchange and does not indicate whether the CM is actively operating in an Energy Management Mode." REFERENCE "DOCSIS 3.1 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.1-I03-140610, Energy Management Features section." ::= { docsIf3CmtsCmRegStatusEntry 16 } docsIf3CmtsCmRegStatusEnergyMgtOperStatus OBJECT-TYPE SYNTAX BITS { em1x1Mode(0), dlsMode(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the CM is currently operating in an Energy Management Mode. If this attribute returns the em1x1Mode(0) bit set, the CM is operating in Energy Management 1x1 Mode. If this attribute returns the dlsMode(1) bit set, the CM is operating in DLS Mode. If this attribute returns all bits cleared, the CM is not operating in any Energy Management Mode. This attribute always returns 0x00 (no bits set) in the case when docsIf3CmtsCmRegStatusEnergyMgtEnabled is set to 0x00 (no Energy Management Features enabled). Note: dlsMode(1) and em1x1Mode(0) are mutually exclusive, thus a return value where both of these bits are 'true' is invalid." REFERENCE "DOCSIS 3.1 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.1-I03-140610, Energy Management Mode Indicator section." ::= { docsIf3CmtsCmRegStatusEntry 17 } docsIf3CmtsCmUsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmtsCmUsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines status information of the CM currently in use Upstream Logical Channels, as reported by the CMTS." ::= { docsIf3MibObjects 4} docsIf3CmtsCmUsStatusEntry OBJECT-TYPE SYNTAX DocsIf3CmtsCmUsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmtsCmUsStatusTable." INDEX { docsIf3CmtsCmRegStatusId, docsIf3CmtsCmUsStatusChIfIndex } ::= { docsIf3CmtsCmUsStatusTable 1 } DocsIf3CmtsCmUsStatusEntry ::= SEQUENCE { docsIf3CmtsCmUsStatusChIfIndex InterfaceIndex, docsIf3CmtsCmUsStatusModulationType DocsisUpstreamType, docsIf3CmtsCmUsStatusRxPower TenthdBmV, docsIf3CmtsCmUsStatusSignalNoise TenthdB, docsIf3CmtsCmUsStatusMicroreflections Unsigned32, docsIf3CmtsCmUsStatusEqData DocsEqualizerData, docsIf3CmtsCmUsStatusUnerroreds Counter32, docsIf3CmtsCmUsStatusCorrecteds Counter32, docsIf3CmtsCmUsStatusUncorrectables Counter32, docsIf3CmtsCmUsStatusHighResolutionTimingOffset Integer32, docsIf3CmtsCmUsStatusIsMuted TruthValue, docsIf3CmtsCmUsStatusRangingStatus RangingState } docsIf3CmtsCmUsStatusChIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute is a key that represents the ifIndex of the upstream interface." ::= { docsIf3CmtsCmUsStatusEntry 1 } docsIf3CmtsCmUsStatusModulationType OBJECT-TYPE SYNTAX DocsisUpstreamType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the modulation type currently used by this upstream channel." ::= { docsIf3CmtsCmUsStatusEntry 2 } docsIf3CmtsCmUsStatusRxPower OBJECT-TYPE SYNTAX TenthdBmV UNITS "TenthdBmV" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the receive power of this upstream channel. The reported value represents the total average power for the channel regardless of whether the CM is reporting Pr, total average power, or P1.6r, the power spectral density in an equivalent 1.6 MHz spectrum." ::= { docsIf3CmtsCmUsStatusEntry 3 } docsIf3CmtsCmUsStatusSignalNoise OBJECT-TYPE SYNTAX TenthdB UNITS "TenthdB" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents Signal/Noise ratio as perceived for upstream data from the CM on this upstream channel." ::= { docsIf3CmtsCmUsStatusEntry 4 } docsIf3CmtsCmUsStatusMicroreflections OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "-dBc" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents microreflections received on this upstream channel." ::= { docsIf3CmtsCmUsStatusEntry 5 } docsIf3CmtsCmUsStatusEqData OBJECT-TYPE SYNTAX DocsEqualizerData MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the equalization data for the CM on this upstream channel." ::= { docsIf3CmtsCmUsStatusEntry 6 } docsIf3CmtsCmUsStatusUnerroreds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the codewords received without error from the CM on this interface. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel." REFERENCE "RFC 2863." ::= { docsIf3CmtsCmUsStatusEntry 7 } docsIf3CmtsCmUsStatusCorrecteds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the codewords received with correctable errors from the CM on this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel." REFERENCE "RFC 2863." ::= { docsIf3CmtsCmUsStatusEntry 8 } docsIf3CmtsCmUsStatusUncorrectables OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the codewords received with uncorrectable errors from the CM on this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel." REFERENCE "RFC 2863." ::= { docsIf3CmtsCmUsStatusEntry 9 } docsIf3CmtsCmUsStatusHighResolutionTimingOffset OBJECT-TYPE SYNTAX Integer32 UNITS "time tick/(64*256)" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the current measured round trip time on this CM's upstream channel in units of (6.25 microseconds/(64*256)). This attribute returns zero if the value is unknown." ::= { docsIf3CmtsCmUsStatusEntry 10 } docsIf3CmtsCmUsStatusIsMuted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute has a value 'true' to indicate that the CM's upstream channel has been muted via CM-CTRL-REQ/CM-CTRL-RSP message exchange." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, section Media Access Control specification." ::= { docsIf3CmtsCmUsStatusEntry 11 } docsIf3CmtsCmUsStatusRangingStatus OBJECT-TYPE SYNTAX RangingState MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the ranging state of the CM." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, section Media Access Control specification." ::= { docsIf3CmtsCmUsStatusEntry 12 } docsIf3MdChCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3MdChCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object configures the association of downstream and upstream channels to a particular MAC Domain (MD) on a CMTS. The creation of channels and MAC domain object interface instances is vendor-specific. In particular, the assignment of the channel interface index is normally vendor-specific. Therefore, this object is intended only for associating channels to a MAC Domain and assumes that those channels were previously configured. The CMTS may have restrictions on which channels can be configured in the same MAC Domain. For example, it could require the upstream channels to be from the same line card. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the ChId attribute to be set." ::= { docsIf3MibObjects 5} docsIf3MdChCfgEntry OBJECT-TYPE SYNTAX DocsIf3MdChCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3MdChCfgTable. The ifIndex key corresponds to the MAC Domain interface where the channel is configured. The CMTS persists all instances of MdChCfg across reinitializations." INDEX { ifIndex, docsIf3MdChCfgChIfIndex } ::= { docsIf3MdChCfgTable 1 } DocsIf3MdChCfgEntry ::= SEQUENCE { docsIf3MdChCfgChIfIndex InterfaceIndex, docsIf3MdChCfgIsPriCapableDs TruthValue, docsIf3MdChCfgChId ChId, docsIf3MdChCfgSfProvAttrMask AttributeMask, docsIf3MdChCfgRowStatus RowStatus } docsIf3MdChCfgChIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the interface index of an existing upstream or downstream channel that is configured to be part of the MAC Domain. For the case of upstream interfaces the CMTS could reject the assignment of upstream logical channels under the same physical upstream interface to different MAC Domains." ::= { docsIf3MdChCfgEntry 1 } docsIf3MdChCfgIsPriCapableDs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set to 'true', this attribute configures the downstream channel as Primary-Capable. The default value for a downstream channel is 'true'. This attribute is not relevant for upstream interfaces, therefore it reports the value 'false' for such interfaces. A CMTS may restrict the permitted value of this attribute based upon physical channel capabilities." ::= { docsIf3MdChCfgEntry 2 } docsIf3MdChCfgChId OBJECT-TYPE SYNTAX ChId (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the 8-bit Downstream Channel ID (DCID) or Upstream Channel ID (UCID) configured for the channel in the MAC Domain." ::= { docsIf3MdChCfgEntry 3 } docsIf3MdChCfgSfProvAttrMask OBJECT-TYPE SYNTAX AttributeMask MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains Provisioned Attribute Mask of non-bonded service flow assignment to this channel." DEFVAL { '00000000'H } ::= { docsIf3MdChCfgEntry 4 } docsIf3MdChCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this instance." ::= { docsIf3MdChCfgEntry 5 } docsIf3RccCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3RccCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This object identifies the scope of the Receive Channel Configuration (RCC) and provides a top level container for the Receive Module and Receive Channel objects. The CMTS selects an instance of this object to assign to a CM when it registers. This object supports the creation and deletion of multiple instances." ::= { docsIf3MibObjects 6} docsIf3RccCfgEntry OBJECT-TYPE SYNTAX DocsIf3RccCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The conceptual row of docsIf3RccCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. The CMTS persists all instances of RccCfg across reinitializations." INDEX { ifIndex, docsIf3RccCfgRcpId, docsIf3RccCfgRccCfgId } ::= { docsIf3RccCfgTable 1 } DocsIf3RccCfgEntry ::= SEQUENCE { docsIf3RccCfgRcpId RcpId, docsIf3RccCfgRccCfgId Unsigned32, docsIf3RccCfgVendorSpecific OCTET STRING, docsIf3RccCfgDescription SnmpAdminString, docsIf3RccCfgRowStatus RowStatus } docsIf3RccCfgRcpId OBJECT-TYPE SYNTAX RcpId MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This key represents the 'Receive Channel Profile Identifier' (RCP-ID) configured for the MAC Domain indicated by this instance." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Standard Receive Channel Profile Encodings Annex." ::= { docsIf3RccCfgEntry 1 } docsIf3RccCfgRccCfgId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This key denotes an RCC combination assignment for a particular RcpId and is unique per combination of MAC Domain and RcpId." ::= { docsIf3RccCfgEntry 2 } docsIf3RccCfgVendorSpecific OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..252)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This attribute contains vendor-specific information of the CM Receive Channel configuration." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Channel Profile/Configuration Vendor Specific Parameters section in the Common Radio Frequency Interface Encodings Annex." DEFVAL { ''H } ::= { docsIf3RccCfgEntry 3 } docsIf3RccCfgDescription OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..15)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This attribute contains a human-readable description of the CM RCP Configuration." DEFVAL { "" } ::= { docsIf3RccCfgEntry 4 } docsIf3RccCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of this instance." ::= { docsIf3RccCfgEntry 5 } docsIf3RccStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3RccStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RCC Status object provides a read-only view of the statically-configured (from the RccCfg object) and dynamically-created RCCs. The CMTS creates an RCC Status instance for each unique MAC Domain Cable Modem Service Group (MD-CM-SG) to which it signals an RCC to the CM." ::= { docsIf3MibObjects 7} docsIf3RccStatusEntry OBJECT-TYPE SYNTAX DocsIf3RccStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3RccStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured." INDEX { ifIndex, docsIf3RccStatusRcpId, docsIf3RccStatusRccStatusId } ::= { docsIf3RccStatusTable 1 } DocsIf3RccStatusEntry ::= SEQUENCE { docsIf3RccStatusRcpId RcpId, docsIf3RccStatusRccStatusId Unsigned32, docsIf3RccStatusRccCfgId Unsigned32, docsIf3RccStatusValidityCode INTEGER, docsIf3RccStatusValidityCodeText SnmpAdminString } docsIf3RccStatusRcpId OBJECT-TYPE SYNTAX RcpId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the RCP-ID to which this instance applies." ::= { docsIf3RccStatusEntry 1 } docsIf3RccStatusRccStatusId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents an RCC combination for a particular RcpId either from an RCC configuration object or a CMTS-determined RCC and is unique per combination of MAC Domain IfIndex and RcpId." ::= { docsIf3RccStatusEntry 2 } docsIf3RccStatusRccCfgId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies an RCC-Configured combination from which this instance was defined. If nonzero, it corresponds to the RccCfg instance from which the RCC was created. Zero means that the RCC was dynamically created by the CMTS." ::= { docsIf3RccStatusEntry 3 } docsIf3RccStatusValidityCode OBJECT-TYPE SYNTAX INTEGER {other(1), valid(2), invalid(3), wrongPrimaryDs(4), missingPrimaryDs(5), multiplePrimaryDs(6), duplicateDs(7), wrongFrequencyRange(8), wrongConnectivity(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the RCC instance of this object is valid or not. An RCC Status instance from a configured or a dynamic RCC could become invalid, for example, due changes in the topology." ::= { docsIf3RccStatusEntry 4 } docsIf3RccStatusValidityCodeText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the CMTS vendor-specific log information from the Receive Channel Configuration Status encoding." ::= { docsIf3RccStatusEntry 5 } docsIf3RxChCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3RxChCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The Receive Channel Configuration object permits an operator to configure how CMs registered with certain Receive Channel Profiles will configure the Receive Channels within their profile. When a CM registers with an RCP for which all Receive Channel Indices (RcIds) are configured in the Receive Module object and all Receive Channels are configured within this object, the CMTS should use the configuration within these objects to set the Receive Channel Configuration returned to the CM in a REG-RSP message. A CMTS may require configuration of all pertinent Receive Module and Receive Channel instances in order to register a CM that reports a Receive Channel Profile (RCP), including any standard Receive Channel Profiles. If the CM reports multiple RCPs, and Receive Module and Receive Channel objects have instances for more than one RCP, the particular RCP selected by the CMTS is not specified. A CMTS is not restricted to assigning Receive Modules based only on the contents of this object. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the ChIfIndex attribute to be set and a valid reference of a RccCfg instance." ::= { docsIf3MibObjects 8} docsIf3RxChCfgEntry OBJECT-TYPE SYNTAX DocsIf3RxChCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The conceptual row of docsIf3RxChCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. The CMTS persists all instances of ReceiveChannelCfg across reinitializations." INDEX { ifIndex, docsIf3RccCfgRcpId, docsIf3RccCfgRccCfgId, docsIf3RxChCfgRcId } ::= { docsIf3RxChCfgTable 1 } DocsIf3RxChCfgEntry ::= SEQUENCE { docsIf3RxChCfgRcId Unsigned32, docsIf3RxChCfgChIfIndex InterfaceIndex, docsIf3RxChCfgPrimaryDsIndicator TruthValue, docsIf3RxChCfgRcRmConnectivityId Unsigned32, docsIf3RxChCfgRowStatus RowStatus } docsIf3RxChCfgRcId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This key represents an identifier for the parameters of the Receive Channel instance within the Receive Channel Profile." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Channel Index section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3RxChCfgEntry 1 } docsIf3RxChCfgChIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This attribute contains the interface index of a Downstream Channel that this Receive Channel Instance defines." ::= { docsIf3RxChCfgEntry 2 } docsIf3RxChCfgPrimaryDsIndicator OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "If set to 'true', this attribute indicates the Receive Channel is to be the primary-capable downstream channel for the CM receiving this RCC. Otherwise, the downstream channel is to be a non-primary-capable channel." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Channel Primary Downstream Channel Indicator section in the Common Radio Frequency Interface Encodings Annex." DEFVAL { false } ::= { docsIf3RxChCfgEntry 3 } docsIf3RxChCfgRcRmConnectivityId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This attribute indicates the Receive Module (via the RmId from the ReceiveModule object) to which this Receive Channel connects. If this object contains a zero value (and thus no Receive Channel Connectivity), the Receive Channel Connectivity TLV is omitted from the RCC." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Channel Connectivity section in the Common Radio Frequency Interface Encodings Annex." DEFVAL { 0 } ::= { docsIf3RxChCfgEntry 4 } docsIf3RxChCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of this instance." ::= { docsIf3RxChCfgEntry 5 } docsIf3RxChStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3RxChStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Receive Channel Status object reports the status of the statically-configured and dynamically-created Receive Channels within an RCC." ::= { docsIf3MibObjects 9} docsIf3RxChStatusEntry OBJECT-TYPE SYNTAX DocsIf3RxChStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3RxChStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. When this object is defined on the CM, the value of RccStatusId is always 1." INDEX { ifIndex, docsIf3RccStatusRcpId, docsIf3RccStatusRccStatusId, docsIf3RxChStatusRcId } ::= { docsIf3RxChStatusTable 1 } DocsIf3RxChStatusEntry ::= SEQUENCE { docsIf3RxChStatusRcId Unsigned32, docsIf3RxChStatusChIfIndex InterfaceIndex, docsIf3RxChStatusPrimaryDsIndicator TruthValue, docsIf3RxChStatusRcRmConnectivityId Unsigned32 } docsIf3RxChStatusRcId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents an identifier for the parameters of the Receive Channel instance within the Receive Channel Profile." ::= { docsIf3RxChStatusEntry 1 } docsIf3RxChStatusChIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the interface index of the Downstream Channel that this Receive Channel Instance defines." ::= { docsIf3RxChStatusEntry 2 } docsIf3RxChStatusPrimaryDsIndicator OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If set to 'true', this attribute indicates the Receive Channel is to be the primary-capable downstream channel for the CM receiving this RCC. Otherwise, the downstream channel is to be a non-primary-capable channel." ::= { docsIf3RxChStatusEntry 3 } docsIf3RxChStatusRcRmConnectivityId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the Receive Module to which this Receive Channel connects. A value a zero indicates that the Receive Channel Connectivity TLV is omitted from the RCC." ::= { docsIf3RxChStatusEntry 4 } docsIf3RxModuleCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3RxModuleCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The Receive Module Configuration object permits an operator to configure how CMs with certain Receive Channel Profiles (RCPs) will configure the Receive Modules within their profile upon CM registration. When a CM registers with an RCP for which all Receive Module Indices (RmIds) are configured in this object and all Receive Channels are configured within the Receive Channel (ReceiveChannel) object, the CMTS should use the configuration within these objects to set the Receive Channel Configuration assigned to the CM in a REG-RSP message. A CMTS may require configuration of all pertinent Receive Module and Receive Channel instances (i.e., MIB table entries) in order to register a CM that reports a Receive Channel Profile. If the CM reports multiple RCPs, and Receive Module and Receive Channel objects have instances (i.e., MIB table entries) for more than one RCP reported by the CM, the particular RCP selected by the CMTS is not specified. A CMTS is not restricted to assigning Receive Modules based only on the contents of this object. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the reference of a valid RccCfg instance." ::= { docsIf3MibObjects 10} docsIf3RxModuleCfgEntry OBJECT-TYPE SYNTAX DocsIf3RxModuleCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The conceptual row of docsIf3RxModuleCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured." INDEX { ifIndex, docsIf3RccCfgRcpId, docsIf3RccCfgRccCfgId, docsIf3RxModuleCfgRmId } ::= { docsIf3RxModuleCfgTable 1 } DocsIf3RxModuleCfgEntry ::= SEQUENCE { docsIf3RxModuleCfgRmId Unsigned32, docsIf3RxModuleCfgRmRmConnectivityId Unsigned32, docsIf3RxModuleCfgFirstCenterFrequency Unsigned32, docsIf3RxModuleCfgRowStatus RowStatus } docsIf3RxModuleCfgRmId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This key represents an identifier of a Receive Module instance within the Receive Channel Profile." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Module Index in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3RxModuleCfgEntry 1 } docsIf3RxModuleCfgRmRmConnectivityId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This attribute represents the higher level (i.e., closer to RF) Receive Module to which this Receive Module connects. If this object contains a zero value (and thus no Receive Module Connectivity), the Receive Module Connectivity TLV is omitted from the RCC. Within a single instance of the ReceiveModule object, the RmRmConnectivityId attribute cannot contain the same value as the RmId attribute. The RmRmConnectivityId attribute points to a separate ReceiveModule object instance with the same value of RccCfgId." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Module Connectivity section in the Common Radio Frequency Interface Encodings Annex." DEFVAL { 0 } ::= { docsIf3RxModuleCfgEntry 2 } docsIf3RxModuleCfgFirstCenterFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hz" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This attribute represents the center frequency, in Hz, and a multiple of 62500, that indicates the lowest frequency channel of the Receive Module, or 0 if not applicable to the Receive Module." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Module First Channel Center Frequency Assignment section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3RxModuleCfgEntry 3 } docsIf3RxModuleCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of this instance." ::= { docsIf3RxModuleCfgEntry 4 } docsIf3RxModuleStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3RxModuleStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Receive Module Status object provides a read-only view of the statically configured and dynamically created Receive Modules within an RCC." ::= { docsIf3MibObjects 11} docsIf3RxModuleStatusEntry OBJECT-TYPE SYNTAX DocsIf3RxModuleStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3RxModuleStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. When this object is defined on the CM, the value of RccStatusId is always 1." INDEX { ifIndex, docsIf3RccStatusRcpId, docsIf3RccStatusRccStatusId, docsIf3RxModuleStatusRmId } ::= { docsIf3RxModuleStatusTable 1 } DocsIf3RxModuleStatusEntry ::= SEQUENCE { docsIf3RxModuleStatusRmId Unsigned32, docsIf3RxModuleStatusRmRmConnectivityId Unsigned32, docsIf3RxModuleStatusFirstCenterFrequency Unsigned32 } docsIf3RxModuleStatusRmId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents an identifier of a Receive Module instance within the Receive Channel Profile." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Receive Module Index section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3RxModuleStatusEntry 1 } docsIf3RxModuleStatusRmRmConnectivityId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Receive Module to which this Receive Module connects. Requirements for module connectivity are detailed in the RmRmConnectivityId of the RccCfg object. A value of zero indicates that the Receive Module TLV is omitted from the RCC." ::= { docsIf3RxModuleStatusEntry 2 } docsIf3RxModuleStatusFirstCenterFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the low frequency channel of the Receive Module, or 0 if not applicable to the Receive Module." ::= { docsIf3RxModuleStatusEntry 3 } docsIf3MdNodeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3MdNodeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object reports the MD-DS-SG-ID and MD-US-SG-ID associated with a MD-CM-SG-ID within a MAC Domain and the Fiber Nodes reached by the MD-CM-SG." ::= { docsIf3MibObjects 12} docsIf3MdNodeStatusEntry OBJECT-TYPE SYNTAX DocsIf3MdNodeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3MdNodeStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-CM-SG-ID is configured." INDEX { ifIndex, docsIf3MdNodeStatusNodeName, docsIf3MdNodeStatusMdCmSgId } ::= { docsIf3MdNodeStatusTable 1 } DocsIf3MdNodeStatusEntry ::= SEQUENCE { docsIf3MdNodeStatusNodeName NodeName, docsIf3MdNodeStatusMdCmSgId Unsigned32, docsIf3MdNodeStatusMdDsSgId Unsigned32, docsIf3MdNodeStatusMdUsSgId Unsigned32 } docsIf3MdNodeStatusNodeName OBJECT-TYPE SYNTAX NodeName (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the name of a fiber node associated with a MD-CM-SG of a MAC Domain." ::= { docsIf3MdNodeStatusEntry 1 } docsIf3MdNodeStatusMdCmSgId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute is a key and indicates the MD-CM-SG-ID of this instance. A particular MdCmSgId in a MAC Domain is associated with one or more Fiber Nodes." ::= { docsIf3MdNodeStatusEntry 2 } docsIf3MdNodeStatusMdDsSgId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the MD-DS-SG-ID of the MD-CM-SG of this object instance. The MdDsSgId values are unique within a MAC Domain." ::= { docsIf3MdNodeStatusEntry 3 } docsIf3MdNodeStatusMdUsSgId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the MD-US-SG-ID of the MD-CM-SG of this object instance. The MdUsSgId values are unique within a MAC Domain." ::= { docsIf3MdNodeStatusEntry 4 } docsIf3MdDsSgStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3MdDsSgStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object returns the list of downstream channel associated with a MAC Domain MD-DS-SG-ID." ::= { docsIf3MibObjects 13} docsIf3MdDsSgStatusEntry OBJECT-TYPE SYNTAX DocsIf3MdDsSgStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3MdDsSgStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-DS-SG-ID is configured. The CMTS is not required to persist instances of this object across reinitializations." INDEX { ifIndex, docsIf3MdDsSgStatusMdDsSgId } ::= { docsIf3MdDsSgStatusTable 1 } DocsIf3MdDsSgStatusEntry ::= SEQUENCE { docsIf3MdDsSgStatusMdDsSgId Unsigned32, docsIf3MdDsSgStatusChSetId ChSetId } docsIf3MdDsSgStatusMdDsSgId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents a MD-DS-SG-ID in a Mac Domain." ::= { docsIf3MdDsSgStatusEntry 1 } docsIf3MdDsSgStatusChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a reference to the list of downstream channels of the MD-DS-SG-ID." ::= { docsIf3MdDsSgStatusEntry 2 } docsIf3MdUsSgStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3MdUsSgStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object returns the list of upstream channels associated with a MAC Domain MD-US-SG-ID." ::= { docsIf3MibObjects 14} docsIf3MdUsSgStatusEntry OBJECT-TYPE SYNTAX DocsIf3MdUsSgStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3MdUsSgStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-DS-SG-ID is configured. The CMTS is not required to persist instances of this object across reinitializations." INDEX { ifIndex, docsIf3MdUsSgStatusMdUsSgId } ::= { docsIf3MdUsSgStatusTable 1 } DocsIf3MdUsSgStatusEntry ::= SEQUENCE { docsIf3MdUsSgStatusMdUsSgId Unsigned32, docsIf3MdUsSgStatusChSetId ChSetId } docsIf3MdUsSgStatusMdUsSgId OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents a MD-US-SG-ID in a Mac Domain." ::= { docsIf3MdUsSgStatusEntry 1 } docsIf3MdUsSgStatusChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a reference to the list of upstream channels of the MD-US-SG-ID." ::= { docsIf3MdUsSgStatusEntry 2 } docsIf3MdUsToDsChMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3MdUsToDsChMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object returns the set of downstream channels that carry UCDs and MAPs for a particular upstream channel in a MAC Domain." ::= { docsIf3MibObjects 15} docsIf3MdUsToDsChMappingEntry OBJECT-TYPE SYNTAX DocsIf3MdUsToDsChMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3MdUsToDsChMappingTable." INDEX { docsIf3MdUsToDsChMappingUsIfIndex, docsIf3MdUsToDsChMappingDsIfIndex, docsIf3MdUsToDsChMappingMdIfIndex } ::= { docsIf3MdUsToDsChMappingTable 1 } DocsIf3MdUsToDsChMappingEntry ::= SEQUENCE { docsIf3MdUsToDsChMappingUsIfIndex InterfaceIndex, docsIf3MdUsToDsChMappingDsIfIndex InterfaceIndex, docsIf3MdUsToDsChMappingMdIfIndex InterfaceIndex } docsIf3MdUsToDsChMappingUsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the interface index of the upstream channel to which this instance applies." ::= { docsIf3MdUsToDsChMappingEntry 1 } docsIf3MdUsToDsChMappingDsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the interface index of a downstream channel carrying in UCDs and Maps associated with the upstream channel defined by this instance." ::= { docsIf3MdUsToDsChMappingEntry 2 } docsIf3MdUsToDsChMappingMdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This key represents the MAC domain of the upstream and downstream channels of this instance." ::= { docsIf3MdUsToDsChMappingEntry 3 } docsIf3MdCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3MdCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains MAC domain level control and configuration attributes." ::= { docsIf3MibObjects 16} docsIf3MdCfgEntry OBJECT-TYPE SYNTAX DocsIf3MdCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3MdCfgTable. The CMTS persists all instances of MdCfg across reinitializations. The ifIndex key corresponds to the MAC Domain interface." INDEX { ifIndex } ::= { docsIf3MdCfgTable 1 } DocsIf3MdCfgEntry ::= SEQUENCE { docsIf3MdCfgMddInterval Unsigned32, docsIf3MdCfgIpProvMode INTEGER, docsIf3MdCfgCmStatusEvCtlEnabled TruthValue, docsIf3MdCfgUsFreqRange INTEGER, docsIf3MdCfgMcastDsidFwdEnabled TruthValue, docsIf3MdCfgMultRxChModeEnabled TruthValue, docsIf3MdCfgMultTxChModeEnabled TruthValue, docsIf3MdCfgEarlyAuthEncrCtrl INTEGER, docsIf3MdCfgTftpProxyEnabled TruthValue, docsIf3MdCfgSrcAddrVerifEnabled TruthValue, docsIf3MdCfgDownChannelAnnex INTEGER, docsIf3MdCfgCmUdcEnabled TruthValue, docsIf3MdCfgSendUdcRulesEnabled TruthValue, docsIf3MdCfgServiceTypeIdList SnmpTagList, docsIf3MdCfgBpi2EnforceCtrl INTEGER, docsIf3MdCfgEnergyMgt1x1Enabled TruthValue } docsIf3MdCfgMddInterval OBJECT-TYPE SYNTAX Unsigned32 (1..2000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute configures the interval for the insertion of MDD messages in each downstream channel of a MAC Domain." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Parameters and Constants Annex." DEFVAL { 2000 } ::= { docsIf3MdCfgEntry 1 } docsIf3MdCfgIpProvMode OBJECT-TYPE SYNTAX INTEGER { ipv4Only(0), ipv6Only(1), alternate(2), dualStack(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute configures the CMTS IP provisioning mode for a MAC Domain. When this attribute is set to 'ipv4Only' the CM will acquire a single IPv4 address for the CM management stack. When this attribute is set to 'ipv6Only' the CM will acquire a single IPv6 address for the CM management stack. When this attribute is set to 'alternate' the CM will acquire a single IPv6 address for the CM management stack and, if failures occur, the CM will fall back to provision and operation with an IPv4 address. When this attribute is set to 'dualStack' the CM will acquire both an IPv6 and IPv4 address for provisioning and operation." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, IP Initialization Parameters TLV section." DEFVAL { ipv6Only } ::= { docsIf3MdCfgEntry 2 } docsIf3MdCfgCmStatusEvCtlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute enables the signaling of the CM-Status Event reporting mechanism." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, CM-STATUS Event Control section " DEFVAL { true } ::= { docsIf3MdCfgEntry 3 } docsIf3MdCfgUsFreqRange OBJECT-TYPE SYNTAX INTEGER { standard(0), extended(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates in MDD messages the upstream frequency upper band edge of an upstream Channel. A value 'standard' means Standard Frequency Range and a value 'extended' means Extended Frequency Range." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Upstream Frequency Upper Band Edge TLV section." DEFVAL { standard } ::= { docsIf3MdCfgEntry 4 } docsIf3MdCfgMcastDsidFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute enables the CMTS to use IP Multicast DSID Forwarding (MDF) for the MAC domain." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Multicast DSID-based Forwarding (MDF) Modes section in the Compatibility with Previous Versions of DOCSIS Annex." DEFVAL { true } ::= { docsIf3MdCfgEntry 5 } docsIf3MdCfgMultRxChModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute enables Downstream Channel Bonding for the MAC Domain." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Downstream Channel Bonding section." DEFVAL { true } ::= { docsIf3MdCfgEntry 6 } docsIf3MdCfgMultTxChModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute enables Multiple Transmit Channel (MTC) Mode for the MAC Domain." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Upstream Channel Bonding section." DEFVAL { true } ::= { docsIf3MdCfgEntry 7 } docsIf3MdCfgEarlyAuthEncrCtrl OBJECT-TYPE SYNTAX INTEGER { disableEae(1), enableEaeRangingBasedEnforcement(2), enableEaeCapabilityBasedEnforcement(3), enableEaeTotalEnforcement(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute enables or disables early authentication and encryption (EAE) signaling for the MAC Domain. It also defines the type of EAE enforcement in the case that EAE is enabled. If set to 'disableEAE', EAE is disabled for the MAC Domain. If set to 'enableEaeRangingBasedEnforcement', 'enableEaeCapabilityBasedEnforcement' or 'enableEaeTotalEnforcement', EAE is enabled for the MAC Domain. The following EAE enforcement methods are defined in the case where EAE signaling is enabled: The option 'enableEaeRangingBasedEnforcement' indicates EAE is enforced on CMs that perform ranging with a B-INIT-RNG-REQ message. The option 'enableEaeCapabilityBasedEnforcement' indicates EAE is enforced on CMs that perform ranging with a B-INIT-RNG-REQ message in which the EAE capability flag is set. The option 'enableEaeTotalEnforcement' indicates EAE is enforced on all CMs regardless of their EAE capabilities." REFERENCE "DOCSIS 3.0 Security Specification CM-SP-SECv3.0-I06-071206, Early Authentication and Encryption section." DEFVAL { enableEaeRangingBasedEnforcement } ::= { docsIf3MdCfgEntry 8 } docsIf3MdCfgTftpProxyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute enables TFTP Proxy functionality for the MAC Domain." REFERENCE "DOCSIS 3.0 Security Specification CM-SP-SECv3.0-I06-071206, TFTP Configuration File Security section." DEFVAL { true } ::= { docsIf3MdCfgEntry 9 } docsIf3MdCfgSrcAddrVerifEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute enables Source Address Verification (SAV) functionality for the MAC Domain." REFERENCE "DOCSIS 3.0 Security Specification CM-SP-SECv3.0-I06-071206, Source Address Verification section." DEFVAL { true } ::= { docsIf3MdCfgEntry 10 } docsIf3MdCfgDownChannelAnnex OBJECT-TYPE SYNTAX INTEGER { unknown(1), other(2), annexA(3), annexB(4), annexC(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the ITU-J-83 Annex being used for this MAC Domain. The value of this attribute indicates the conformance of the implementation to important regional cable standards. Valid enumerations for the attribute are: unknown other annexA : Annex A from ITU-J83 is used. annexB : Annex B from ITU-J83 is used. annexC : Annex C from ITU-J83 is used. Values 6-255 are reserved." DEFVAL { unknown } ::= { docsIf3MdCfgEntry 11 } docsIf3MdCfgCmUdcEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute instructs the CMTS MAC Domain to enable Upstream Drop Classifiers (UDC) for the CMs attempting registration in this MAC Domain." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Subscriber Management TLVs section in the Common Radio Frequency Interface Encodings Annex." DEFVAL { false } ::= { docsIf3MdCfgEntry 12 } docsIf3MdCfgSendUdcRulesEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true' and when the CM signals to the CMTS 'Upstream Drop Classifier Group ID' encodings, this attribute instructs the CMTS MAC Domain to send the Subscriber Management Filters rules associated with the 'Upstream Drop Classifier Group ID' encodings to the CM in the form of UDCs when the following conditions occurs: - The attribute CmUdcEnabled value for this MAC Domain is set to 'true', and - The CM has the UDC capability advertised as supported. If there is no a single Subscriber Management Filter configured in the CMTS for the CM's signaled UDC Group ID, the CMTS does not send UDC encodings to the CM. It is vendor specific whether the CMTS maintains enforcement of the CM signaled or default Subscriber Management Filter groups in the upstream direction." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Subscriber Management TLVs section in the Common Radio Frequency Interface Encodings Annex." DEFVAL { false } ::= { docsIf3MdCfgEntry 13 } docsIf3MdCfgServiceTypeIdList OBJECT-TYPE SYNTAX SnmpTagList MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the list of Service Type IDs associated with the MAC Domain. During the CM registration process the CMTS will attempt to redirect the CM to a MAC Domain where the CM' Service Type TLV is contained in this attribute." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Service Type Identifier section in the Common Radio Frequency Interface Encodings Annex." DEFVAL { "" } ::= { docsIf3MdCfgEntry 14 } docsIf3MdCfgBpi2EnforceCtrl OBJECT-TYPE SYNTAX INTEGER { disable(0), qosCfgFileWithBpi2AndCapabPrivSupportEnabled(1), qosCfgFileWithBpi2Enabled(2), qosCfgFile(3), total(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the level of BPI+ enforcement policies with the MAC Domain. The following BPI+ enforcement policies are defined in the case where BPI+ is enabled: The option 'disable' indicates the CMTS does not enforce BPI+. The option 'qosCfgFileWithBpi2AndCapabPrivSupportEnabled' indicates the CMTS enforces BPI+ on CMs that register with a DOCSIS 1.1 style configuration file with parameters indicating BPI+ is enabled (missing TLV 29 or containing TLV 29 set to enable) and with a Modem Capabilities Privacy Support TLV (5.6) set to BPI+ support. The option 'qosCfgFileWithBpi2Enabled' indicates the CMTS enforces BPI+ on CMs that register with a DOCSIS 1.1 style configuration file with parameters indicating BPI+ is enabled (missing TLV 29 or containing TLV 29 set to enable). The option 'qosCfgFile' indicates the CMTS enforces BPI+ on CMs that register with a DOCSIS 1.1 style configuration file. The option 'total' indicates the CMTS enforces BPI+ on all CMs." REFERENCE "DOCSIS 3.0 Security Specification CM-SP-SECv3.0-I12-100115, BPI+ Enforce section." DEFVAL { qosCfgFileWithBpi2Enabled } ::= { docsIf3MdCfgEntry 15 } docsIf3MdCfgEnergyMgt1x1Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether the CMTS is configured for 1x1 Energy Management Mode of operation on a per MAC Domain basis. If this attribute is set to 'true', the CMTS is configured for 1x1 Energy Management Mode of operation on this MAC Domain. If this attribute is set to 'false', the Energy Management 1x1 Mode of operation is disabled in the CMTS on this MAC Domain" REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I20-121113, Energy Management Capabilities section." DEFVAL { false } ::= { docsIf3MdCfgEntry 16 } docsIf3BondingGrpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3BondingGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines statically configured Downstream Bonding Groups and Upstream Bonding Groups on the CMTS. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the ChList attribute to be set." ::= { docsIf3MibObjects 17} docsIf3BondingGrpCfgEntry OBJECT-TYPE SYNTAX DocsIf3BondingGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3BondingGrpCfgTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured. The CMTS persists all instances of BondingGrpCfg across reinitializations." INDEX { ifIndex, docsIf3BondingGrpCfgDir, docsIf3BondingGrpCfgCfgId } ::= { docsIf3BondingGrpCfgTable 1 } DocsIf3BondingGrpCfgEntry ::= SEQUENCE { docsIf3BondingGrpCfgDir IfDirection, docsIf3BondingGrpCfgCfgId Unsigned32, docsIf3BondingGrpCfgChList ChannelList, docsIf3BondingGrpCfgSfProvAttrMask AttributeMask, docsIf3BondingGrpCfgDsidReseqWaitTime Unsigned32, docsIf3BondingGrpCfgDsidReseqWarnThrshld Unsigned32, docsIf3BondingGrpCfgRowStatus RowStatus } docsIf3BondingGrpCfgDir OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute defines the ordered list of channels that comprise the channel set" ::= { docsIf3BondingGrpCfgEntry 1 } docsIf3BondingGrpCfgCfgId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the configured bonding group identifier in the indicated direction for the MAC Domain. This attribute is used for the sole purpose of tracking bonding groups defined by management systems." ::= { docsIf3BondingGrpCfgEntry 2 } docsIf3BondingGrpCfgChList OBJECT-TYPE SYNTAX ChannelList (SIZE (2..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the list of channels of the bonding group." ::= { docsIf3BondingGrpCfgEntry 3 } docsIf3BondingGrpCfgSfProvAttrMask OBJECT-TYPE SYNTAX AttributeMask MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the Provisioned Attribute Mask encoding for the bonding group." DEFVAL { '80000000'H } ::= { docsIf3BondingGrpCfgEntry 4 } docsIf3BondingGrpCfgDsidReseqWaitTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..180 | 255) UNITS "hundredMicroseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "For a Downstream Bonding Group, this attribute provides the DSID Resequencing Wait Time that is to be used for all DSIDs associated with this Downstream Bonding Group. The value of 255 indicates that the DSID Resequencing Wait Time is determined by the CMTS. The value zero in not supported for downstream bonding groups. For an Upstream Bonding Group, this attribute has no meaning and returns the value 0." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Service Flow Assignment section." DEFVAL { 255 } ::= { docsIf3BondingGrpCfgEntry 5 } docsIf3BondingGrpCfgDsidReseqWarnThrshld OBJECT-TYPE SYNTAX Unsigned32 (0..179 | 255) UNITS "hundredMicroseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "For a Downstream Bonding Group, this attribute provides the DSID Resequencing Warning Threshold that is to be used for all DSIDs associated with this Downstream Bonding Group. The value of 255 indicates that the DSID Resequencing Warning Threshold is determined by the CMTS. The value of 0 indicates that the threshold warnings are disabled. When the value of DsidReseqWaitTime is not equal to 0 or 255, the CMTS must ensure that the value of this object is either 255 or less than the value of DsidReseqWaitTime." DEFVAL { 255 } ::= { docsIf3BondingGrpCfgEntry 6 } docsIf3BondingGrpCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this instance." ::= { docsIf3BondingGrpCfgEntry 7 } docsIf3DsBondingGrpStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3DsBondingGrpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object returns administratively-configured and CMTS defined downstream bonding groups." ::= { docsIf3MibObjects 18} docsIf3DsBondingGrpStatusEntry OBJECT-TYPE SYNTAX DocsIf3DsBondingGrpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3DsBondingGrpStatusTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured." INDEX { ifIndex, docsIf3DsBondingGrpStatusChSetId } ::= { docsIf3DsBondingGrpStatusTable 1 } DocsIf3DsBondingGrpStatusEntry ::= SEQUENCE { docsIf3DsBondingGrpStatusChSetId ChSetId, docsIf3DsBondingGrpStatusMdDsSgId Unsigned32, docsIf3DsBondingGrpStatusCfgId Unsigned32 } docsIf3DsBondingGrpStatusChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the identifier for the Downstream Bonding Group or the single-downstream channel of this instance." ::= { docsIf3DsBondingGrpStatusEntry 1 } docsIf3DsBondingGrpStatusMdDsSgId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the MD-DS-SG-ID that includes all the downstream channels of the Downstream Bonding Group. The value zero indicates that the bonding group does not contain channels from a single MD-DS-SG and therefore the bonding group is not valid and usable." ::= { docsIf3DsBondingGrpStatusEntry 2 } docsIf3DsBondingGrpStatusCfgId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the BondingGrpCfgId for the downstream bonding group if it was configured. Otherwise, the zero value indicates that the CMTS will define the bonding group." ::= { docsIf3DsBondingGrpStatusEntry 3 } docsIf3UsBondingGrpStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3UsBondingGrpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object returns administratively-configured and CMTS-defined upstream bonding groups." ::= { docsIf3MibObjects 19} docsIf3UsBondingGrpStatusEntry OBJECT-TYPE SYNTAX DocsIf3UsBondingGrpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3UsBondingGrpStatusTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured." INDEX { ifIndex, docsIf3UsBondingGrpStatusChSetId } ::= { docsIf3UsBondingGrpStatusTable 1 } DocsIf3UsBondingGrpStatusEntry ::= SEQUENCE { docsIf3UsBondingGrpStatusChSetId ChSetId, docsIf3UsBondingGrpStatusMdUsSgId Unsigned32, docsIf3UsBondingGrpStatusCfgId Unsigned32 } docsIf3UsBondingGrpStatusChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the identifier for the Upstream Bonding Group or the single-upstream channel of this instance." ::= { docsIf3UsBondingGrpStatusEntry 1 } docsIf3UsBondingGrpStatusMdUsSgId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the MD-US-SG-ID that includes all the upstream channels of the Upstream Bonding Group. The value zero indicates that the bonding group does not contain channels from a single MD-US-SG and therefore the bonding group is not valid and usable." ::= { docsIf3UsBondingGrpStatusEntry 2 } docsIf3UsBondingGrpStatusCfgId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the BondingGrpCfgId for the upstream bonding group if it was configured. Otherwise, the zero value indicates that the CMTS defines the bonding group." ::= { docsIf3UsBondingGrpStatusEntry 3 } docsIf3UsChExtTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3UsChExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines management extensions for upstream channels, in particular SCDMA parameters." ::= { docsIf3MibObjects 20} docsIf3UsChExtEntry OBJECT-TYPE SYNTAX DocsIf3UsChExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3UsChExtTable. The ifIndex key corresponds to each of the upstream channels." INDEX { ifIndex } ::= { docsIf3UsChExtTable 1 } DocsIf3UsChExtEntry ::= SEQUENCE { docsIf3UsChExtSacCodeHoppingSelectionMode INTEGER, docsIf3UsChExtScdmaSelectionStringActiveCodes ScdmaSelectionString } docsIf3UsChExtSacCodeHoppingSelectionMode OBJECT-TYPE SYNTAX INTEGER { none(0), sac1NoCodeHopping(1), sac1CodeHoppingMode1(2), sac2CodeHoppingMode2(3), sac2NoCodeHopping(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the selection mode for active codes and code hopping. 'none' Non-SCDMA channel 'sac1NoCodeHopping' Selectable active codes mode 1 and code hopping disabled 'sac1CodeHoppingMode1' Selectable active codes mode 1 and code hopping mode 1 'sac2CodeHoppingMode2' Selectable active codes mode 2 and code hopping mode 2 'sac2NoCodeHopping' Selectable active codes mode 2 and code hopping disabled." REFERENCE "DOCSIS 3.0 Physical Layer Specification CM-SP-PHYv3.0-I05-070803, Mini-slot Numbering Parameters in UCD section." ::= { docsIf3UsChExtEntry 1 } docsIf3UsChExtScdmaSelectionStringActiveCodes OBJECT-TYPE SYNTAX ScdmaSelectionString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the active codes of the upstream channel and it is applicable only when SacCodeHoppingSelectionMode is 'sac2CodeHoppingMode2." REFERENCE "DOCSIS 3.0 Physical Layer Specification CM-SP-PHYv3.0-I05-070803, Mini-slot Numbering Parameters in UCD section." ::= { docsIf3UsChExtEntry 2 } docsIf3CmCapabilities OBJECT IDENTIFIER ::= { docsIf3MibObjects 21 } docsIf3CmCapabilitiesReq OBJECT-TYPE SYNTAX Tlv8 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the TLV encoding for TLV-5 sent in a REG-REQ. The first byte of this encoding is expected to be '05'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Modem Capabilities Encoding section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3CmCapabilities 1 } docsIf3CmCapabilitiesRsp OBJECT-TYPE SYNTAX Tlv8 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the TLV encoding for TLV-5 received in a REG-RSP. The first byte of this encoding is expected to be '05'H." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Modem Capabilities Encoding section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3CmCapabilities 2 } docsIf3UsChSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3UsChSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines a set of upstream channels. These channel sets may be associated with channel bonding groups, MD-US-SGs, MD-CM-SGs, or any other channel set that the CMTS may derive from other CMTS processes." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Partial Service Encoding section and Cable Modem Attribute Masks section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3MibObjects 22} docsIf3UsChSetEntry OBJECT-TYPE SYNTAX DocsIf3UsChSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3UsChSetTable. The ifIndex key corresponds to the MAC Domain interface where the upstream channel set is defined." INDEX { ifIndex, docsIf3UsChSetId } ::= { docsIf3UsChSetTable 1 } DocsIf3UsChSetEntry ::= SEQUENCE { docsIf3UsChSetId ChSetId, docsIf3UsChSetChList ChannelList } docsIf3UsChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key defines a reference identifier for the upstream channel set within the MAC Domain." ::= { docsIf3UsChSetEntry 1 } docsIf3UsChSetChList OBJECT-TYPE SYNTAX ChannelList (SIZE (0 | 2..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the ordered list of channels that comprise the upstream channel set" ::= { docsIf3UsChSetEntry 2 } docsIf3DsChSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3DsChSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines a set of downstream channels. These channel sets may be associated with channel bonding groups, MD-DS-SGs, MD-CM-SGs, or any other channel set that the CMTS may derive from other CMTS processes." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Partial Service Encoding section and Cable Modem Attribute Masks section in the Common Radio Frequency Interface Encodings Annex." ::= { docsIf3MibObjects 23} docsIf3DsChSetEntry OBJECT-TYPE SYNTAX DocsIf3DsChSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3DsChSetTable. The ifIndex key corresponds to the MAC Domain interface where the downstream channel set is defined." INDEX { ifIndex, docsIf3DsChSetId } ::= { docsIf3DsChSetTable 1 } DocsIf3DsChSetEntry ::= SEQUENCE { docsIf3DsChSetId ChSetId, docsIf3DsChSetChList ChannelList } docsIf3DsChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key defines a reference identifier for the downstream channel set within the MAC Domain." ::= { docsIf3DsChSetEntry 1 } docsIf3DsChSetChList OBJECT-TYPE SYNTAX ChannelList (SIZE (0 | 2..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the ordered list of channels that comprise the downstream channel set." ::= { docsIf3DsChSetEntry 2 } docsIf3SignalQualityExtTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3SignalQualityExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides an in-channel received modulation error ratio metric for CM and CMTS." ::= { docsIf3MibObjects 24} docsIf3SignalQualityExtEntry OBJECT-TYPE SYNTAX DocsIf3SignalQualityExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3SignalQualityExtTable. At the CM, this object describes the received modulation error ratio of each downstream channel. At the CMTS, it describes the received modulation error ratio of each logical upstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128) for Cable Modems. For Cable Modem Termination Systems, an entry exists for each ifEntry with an ifType of docsCableUpstreamChannel(205)." INDEX { ifIndex } ::= { docsIf3SignalQualityExtTable 1 } DocsIf3SignalQualityExtEntry ::= SEQUENCE { docsIf3SignalQualityExtRxMER TenthdB, docsIf3SignalQualityExtRxMerSamples Unsigned32 } docsIf3SignalQualityExtRxMER OBJECT-TYPE SYNTAX TenthdB (-2147483648..2147483647) UNITS "TenthdB" MAX-ACCESS read-only STATUS current DESCRIPTION "RxMER provides an in-channel received Modulation Error Ratio (MER). RxMER is defined as an estimate, provided by the demodulator, of the ratio: (average constellation energy with equally likely symbols) / (average squared magnitude of error vector) RxMER is measured just prior to FEC (trellis/Reed-Solomon) decoding. RxMER includes the effects of the HFC channel as well as implementation effects of the modulator and demodulator. Error vector estimation may vary among demodulator implementations. The CMTS RxMER is averaged over a given number of bursts at the burst receiver, which may correspond to transmissions from multiple users. In the case of S-CDMA mode, RxMER is measured on the de-spread signal." ::= { docsIf3SignalQualityExtEntry 1 } docsIf3SignalQualityExtRxMerSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "RxMerSamples is a statistically significant number of symbols for the CM, or bursts for the CMTS, processed to arrive at the RxMER value. For the CMTS, the MER measurement includes only valid bursts that are not in contention regions." ::= { docsIf3SignalQualityExtEntry 2 } docsIf3CmtsSignalQualityExtTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmtsSignalQualityExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides metrics and parameters associated with received carrier, noise and interference power levels in the upstream channels of the CMTS." ::= { docsIf3MibObjects 25} docsIf3CmtsSignalQualityExtEntry OBJECT-TYPE SYNTAX DocsIf3CmtsSignalQualityExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmtsSignalQualityExtTable. The ifIndex key corresponds to each of the upstream channels. The CMTS is not required to persist the values of all instances of CmtsSignalQualityExt across reinitialization." INDEX { ifIndex } ::= { docsIf3CmtsSignalQualityExtTable 1 } DocsIf3CmtsSignalQualityExtEntry ::= SEQUENCE { docsIf3CmtsSignalQualityExtCNIR TenthdB, docsIf3CmtsSignalQualityExtExpectedRxSignalPower TenthdBmV } docsIf3CmtsSignalQualityExtCNIR OBJECT-TYPE SYNTAX TenthdB MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides an upstream in-channel Carrier-to-Noise plus Interference Ratio (CNIR). CNIR is defined as the ratio of the expected commanded received signal power at the CMTS input, assuming QPSK0 modulation, to the noise plus interference in the channel. This measurement occurs prior to the point at which the desired CM signal, when present, is demodulated. The measurement includes the effect of the receive matched filter but does not include the effect of any ingress filtering. Both the signal power and noise/interference power are referenced to the same point, e.g., CMTS input." ::= { docsIf3CmtsSignalQualityExtEntry 1 } docsIf3CmtsSignalQualityExtExpectedRxSignalPower OBJECT-TYPE SYNTAX TenthdBmV MAX-ACCESS read-only STATUS current DESCRIPTION "ExpectedReceivedSignalPower is the power of the expected commanded received signal in the channel, referenced to the CMTS input." ::= { docsIf3CmtsSignalQualityExtEntry 2 } docsIf3CmtsSpectrumAnalysisMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmtsSpectrumAnalysisMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure the logical upstream interfaces to perform the spectrum measurements. This object supports creation and deletion of instances." ::= { docsIf3MibObjects 26} docsIf3CmtsSpectrumAnalysisMeasEntry OBJECT-TYPE SYNTAX DocsIf3CmtsSpectrumAnalysisMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmtsSpectrumAnalysisMeasTable. The ifIndex key corresponds to each of the upstream channels. The CMTS is not required to persist instances of this object across reinitializations." INDEX { ifIndex } ::= { docsIf3CmtsSpectrumAnalysisMeasTable 1 } DocsIf3CmtsSpectrumAnalysisMeasEntry ::= SEQUENCE { docsIf3CmtsSpectrumAnalysisMeasAmplitudeData AmplitudeData, docsIf3CmtsSpectrumAnalysisMeasTimeInterval Unsigned32, docsIf3CmtsSpectrumAnalysisMeasRowStatus RowStatus } docsIf3CmtsSpectrumAnalysisMeasAmplitudeData OBJECT-TYPE SYNTAX AmplitudeData MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides a list of the spectral amplitudes corresponding to the frequency bins ordered from lowest to highest frequencies covering the frequency span. Information about the center frequency, frequency span, number of bins and resolution bandwidth are included to provide context to the measurement point The CMTS must support the number of bins as an odd number in order to provide a spectrum representation that is symmetric about the middle data point or bin. The CMTS must support a number of bins greater than or equal to 257 for frequency spans greater than or equal to 6.4 MHz. The CMTS must not exceed 25 kHz bin spacing for measurement of frequency spans less than or equal to 6.4 MHz. The bins measurements are updated periodically at time intervals given by the TimeInterval attribute." ::= { docsIf3CmtsSpectrumAnalysisMeasEntry 1 } docsIf3CmtsSpectrumAnalysisMeasTimeInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "TimeInterval is the CMTS estimated average repetition period of measurements. This attribute defines the average rate at which new spectra can be retrieved." ::= { docsIf3CmtsSpectrumAnalysisMeasEntry 2 } docsIf3CmtsSpectrumAnalysisMeasRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this instance." ::= { docsIf3CmtsSpectrumAnalysisMeasEntry 3 } docsIf3CmtsCmCtrl OBJECT IDENTIFIER ::= { docsIf3MibObjects 27 } docsIf3CmtsCmCtrlCmdMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the MAC Address of the CM which the CMTS is instructed to send the CM-CTRL-REQ message." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Media Access Control Specification section." DEFVAL { '000000000000'H } ::= { docsIf3CmtsCmCtrl 1 } docsIf3CmtsCmCtrlCmdMuteUsChId OBJECT-TYPE SYNTAX ChId MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the Upstream Channel ID (UCID) to mute or unmute. A value of zero indicates all upstream channels. This attribute is only applicable when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'mute'." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Media Access Control Specification section." DEFVAL { 0 } ::= { docsIf3CmtsCmCtrl 2 } docsIf3CmtsCmCtrlCmdMuteInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the length of time that the mute operation is in effect. This attribute is only applicable when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'mute'. A value of 0 is an indication to unmute the channel referenced by the docsIf3CmtsCmCtrlCmdMuteUsChId attribute while a value of 0xFFFFFFFF is used to mute the channel referenced by the docsIf3CmtsCmCtrlCmdMuteUsChId attribute indefinitely." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Media Access Control Specification section." DEFVAL { 1 } ::= { docsIf3CmtsCmCtrl 3 } docsIf3CmtsCmCtrlCmdDisableForwarding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 'true', this attribute disables data forwarding to the CMCI when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'disableForwarding'. When set to 'false', this attribute enables data forwarding to the CMCI when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'disableForwarding'. This attribute is only applicable when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'disableForwarding'." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Media Access Control Specification section." DEFVAL { false } ::= { docsIf3CmtsCmCtrl 4 } docsIf3CmtsCmCtrlCmdCommit OBJECT-TYPE SYNTAX INTEGER { mute(1), cmReinit(2), disableForwarding(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the type of command for the CMTS to trigger in the CM-CTRL-REQ message. This attribute will return the value of the last operation performed or the default value if no operation has been performed." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, Media Access Control Specification section." DEFVAL { mute } ::= { docsIf3CmtsCmCtrl 5 } docsIf3CmDpvStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmDpvStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the DOCSIS Path Verify Statistics collected in the cable modem device. The CMTS controls the logging of DPV statistics in the cable modem. Therefore the context and nature of the measurements are governed by the CMTS and not self-descriptive when read from the CM." ::= { docsIf3MibObjects 28} docsIf3CmDpvStatsEntry OBJECT-TYPE SYNTAX DocsIf3CmDpvStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmDpvStatsTable." INDEX { ifIndex, docsIf3CmDpvStatsGrpId } ::= { docsIf3CmDpvStatsTable 1 } DocsIf3CmDpvStatsEntry ::= SEQUENCE { docsIf3CmDpvStatsGrpId Unsigned32, docsIf3CmDpvStatsLastMeasLatency Unsigned32, docsIf3CmDpvStatsLastMeasTime DateAndTime, docsIf3CmDpvStatsMinLatency Unsigned32, docsIf3CmDpvStatsMaxLatency Unsigned32, docsIf3CmDpvStatsAvgLatency Unsigned32, docsIf3CmDpvStatsNumMeas Unsigned32, docsIf3CmDpvStatsLastClearTime DateAndTime } docsIf3CmDpvStatsGrpId OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the DPV Group ID. The CM reports two instance of DPV statistics per downstream normally referred as Statistical Group 1 and Statistical Group 2." ::= { docsIf3CmDpvStatsEntry 1 } docsIf3CmDpvStatsLastMeasLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "nanoseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the last latency measurement for this statistical group." ::= { docsIf3CmDpvStatsEntry 2 } docsIf3CmDpvStatsLastMeasTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the last measurement time of the last latency measurement for this statistical group. This attribute reports the EPOC time value when no measurements are being reported or after the statistics were cleared." ::= { docsIf3CmDpvStatsEntry 3 } docsIf3CmDpvStatsMinLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "nanoseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the minimum latency measurement for this statistical group since the last time statistics were cleared." ::= { docsIf3CmDpvStatsEntry 4 } docsIf3CmDpvStatsMaxLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "nanoseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the maximum latency measurement for this statistical group since the last time statistics were cleared." ::= { docsIf3CmDpvStatsEntry 5 } docsIf3CmDpvStatsAvgLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "nanoseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the average latency measurement for this statistical group since the last time statistics were cleared. The averaging mechanism is controlled by the CMTS, and can be a simple average (mean) or an exponential moving average." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, DOCSIS Path Verification section." ::= { docsIf3CmDpvStatsEntry 6 } docsIf3CmDpvStatsNumMeas OBJECT-TYPE SYNTAX Unsigned32 UNITS "measurements" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the number of latency measurements made for this statistical group since the last time statistics were cleared." ::= { docsIf3CmDpvStatsEntry 7 } docsIf3CmDpvStatsLastClearTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the last time statistics were cleared for this statistical group." ::= { docsIf3CmDpvStatsEntry 8 } docsIf3CmEventCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmEventCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the control mechanism to enable the dispatching of events based on the event Id. The following rules define the event control behavior: - The CmEventCtrl object has no instances or contains an instance with Event ID 0. All events matching the Local Log settings of docsDevEvReporting are sent to local log ONLY. - The CmEventCtrl object contains configured instances Only events matching the Event Ids configured in the object are sent according to the settings of the docsDevEvReporting object. The CM does not persist instances of CmEventCtrl across reinitializations." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I11-100115, Section N.2.2.5 CmEventCtrl Object." ::= { docsIf3MibObjects 29} docsIf3CmEventCtrlEntry OBJECT-TYPE SYNTAX DocsIf3CmEventCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmEventCtrlTable." INDEX { docsIf3CmEventCtrlEventId } ::= { docsIf3CmEventCtrlTable 1 } DocsIf3CmEventCtrlEntry ::= SEQUENCE { docsIf3CmEventCtrlEventId Unsigned32, docsIf3CmEventCtrlStatus RowStatus } docsIf3CmEventCtrlEventId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the Event ID of the event being enabled for delivery to a dispatch mechanism (e.g., syslog)." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I07-080522, Format and Content for Event, Syslog, and SNMP Notification Annex." ::= { docsIf3CmEventCtrlEntry 1 } docsIf3CmEventCtrlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this instance." ::= { docsIf3CmEventCtrlEntry 2 } docsIf3CmtsEventCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmtsEventCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the control mechanism to enable the dispatching of events based on the event Id. The following rules define the event control behavior: - The CmtsEventCtrl object has no instances or contains an instance with Event ID 0. All events matching the Local Log settings of docsDevEvReporting are sent to local log ONLY. - The CmtsEventCtrl object contains configured instances Only events matching the Event Ids configured in the object are sent according to the settings of the docsDevEvReporting object. - The CMTS persists all instances of CmtsEventCtrl across reinitializations." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I11-100115, Section N.2.3.4 CmtsEventCtrl Object." ::= { docsIf3MibObjects 30} docsIf3CmtsEventCtrlEntry OBJECT-TYPE SYNTAX DocsIf3CmtsEventCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmtsEventCtrlTable." INDEX { docsIf3CmtsEventCtrlEventId } ::= { docsIf3CmtsEventCtrlTable 1 } DocsIf3CmtsEventCtrlEntry ::= SEQUENCE { docsIf3CmtsEventCtrlEventId Unsigned32, docsIf3CmtsEventCtrlStatus RowStatus } docsIf3CmtsEventCtrlEventId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the Event ID of the event being enabled for delivery to a dispatch mechanism (e.g., syslog)." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I07-080522, Format and Content for Event, Syslog, and SNMP Notification Annex." ::= { docsIf3CmtsEventCtrlEntry 1 } docsIf3CmtsEventCtrlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this instance." ::= { docsIf3CmtsEventCtrlEntry 2 } docsIf3CmMdCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmMdCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains CM MAC domain level control and configuration attributes." ::= { docsIf3MibObjects 31} docsIf3CmMdCfgEntry OBJECT-TYPE SYNTAX DocsIf3CmMdCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmMdCfgTable. The ifIndex key corresponds to the MAC Domain interface." INDEX { ifIndex } ::= { docsIf3CmMdCfgTable 1 } DocsIf3CmMdCfgEntry ::= SEQUENCE { docsIf3CmMdCfgIpProvMode INTEGER, docsIf3CmMdCfgIpProvModeResetOnChange TruthValue, docsIf3CmMdCfgIpProvModeResetOnChangeHoldOffTimer Unsigned32, docsIf3CmMdCfgIpProvModeStorageType StorageType } docsIf3CmMdCfgIpProvMode OBJECT-TYPE SYNTAX INTEGER { ipv4Only(0), ipv6Only(1), honorMdd(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies whether the CM honors or ignores the CMTS MDD TLV 5.1 setting in order to configure its IP provisioning mode. The CM relies upon the CMTS to facilitate the successful IP address acquisition independently of the MDD. When this attribute is set to 'ipv4Only' the CM will initiate the acquisition of a single IPv4 address for the CM management stack. When this attribute is set to 'ipv6Only' the CM will initiate the acquisition of a single IPv6 address for the CM management stack. When this attribute is set to 'honorMdd' the CM will initiate the acquisition of an IPv6 or IPv4 address as directed by the MDD message for provisioning and operation." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I14-101008, IP Initialization Parameters TLV section." DEFVAL { honorMdd } ::= { docsIf3CmMdCfgEntry 1 } docsIf3CmMdCfgIpProvModeResetOnChange OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute determines if the CM is to automatically reset upon change of the IpProvMode attribute. The attribute has a default value of 'false' (2) which means that the CM does not reset upon change to IpProvMode attribute. When this attribute is set to 'true' (1), the CM resets upon a change to the IpProvMode attribute." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I14-101008, IP Initialization Parameters TLV section." DEFVAL { false } ::= { docsIf3CmMdCfgEntry 2 } docsIf3CmMdCfgIpProvModeResetOnChangeHoldOffTimer OBJECT-TYPE SYNTAX Unsigned32 (0..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute determines how long a CM with IpProvModeResetOnChange set to 'true' waits to reset. When the IpProvModeResetOnChange attribute is set to 'true' (1), the CM will decrement from the configured timer value before resetting. The default value of the IpProvModeResetOnChangeHoldOffTimer is 0 seconds which is equivalent to an immediate reset." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I14-101008, IP Initialization Parameters TLV section." DEFVAL { 0 } ::= { docsIf3CmMdCfgEntry 3 } docsIf3CmMdCfgIpProvModeStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute determines if the CM persists the value of IpProvMode across a single reset or across all resets. The default value of this attribute is 'nonVolatile' (3) which means that the CM persists the value of IpProvMode across all resets. The CM persists the value of IpProveMode across only a single reset when IpProvModeStorageType is set to volatile(2). Other StorageType values are not applicable for this object; an attempt to set this object to a value of other(1), permanent(4), or readOnly(5) will be rejected with an error code of inconsistentValue." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I14-101008, IP Initialization Parameters TLV section." DEFVAL { nonVolatile } ::= { docsIf3CmMdCfgEntry 4 } docsIf3CmEnergyMgtCfg OBJECT IDENTIFIER ::= { docsIf3MibObjects 32 } docsIf3CmEnergyMgtCfgFeatureEnabled OBJECT-TYPE SYNTAX BITS{em1x1Feature(0)} MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates which energy savings features have been enabled in the Cable Modem. The CM enables use of Energy Management Features only if both the Energy Management Feature Control TLV and Energy Management Modem Capability Response from the CMTS indicate that the feature is enabled. If bit 0 is set, the Energy Management 1x1 Mode feature is enabled." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I20-121113, Energy Management Features section." ::= { docsIf3CmEnergyMgtCfg 1 } docsIf3CmEnergyMgtCfgCyclePeriod OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies a minimum time period (in seconds) that must elapse between EM-REQ transactions in certain situations: - In the case of Energy Management 1x1 Mode, this attribute sets the minimum cycle time that a CM will use for sending requests to enter Energy Management 1x1 Mode. - In the case that the CM fails to receive an EM-RSP message after the maximum number of retries, this attribute sets the minimum amount of time to elapse before the CM can attempt another EM-REQ transaction." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I20-121113, Energy Management Cycle Period section." DEFVAL { 900 } ::= { docsIf3CmEnergyMgtCfg 2 } docsIf3CmEnergyMgt1x1CfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmEnergyMgt1x1CfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides configuration state information on the CM for the Energy Management 1x1 Mode feature." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I20-121113, Energy Management 1x1 Mode Encodings section." ::= { docsIf3MibObjects 33} docsIf3CmEnergyMgt1x1CfgEntry OBJECT-TYPE SYNTAX DocsIf3CmEnergyMgt1x1CfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmEnergyMgt1x1CfgTable." INDEX { docsIf3CmEnergyMgt1x1CfgDirection } ::= { docsIf3CmEnergyMgt1x1CfgTable 1 } DocsIf3CmEnergyMgt1x1CfgEntry ::= SEQUENCE { docsIf3CmEnergyMgt1x1CfgDirection IfDirection, docsIf3CmEnergyMgt1x1CfgEntryBitrateThrshld Unsigned32, docsIf3CmEnergyMgt1x1CfgEntryTimeThrshld Unsigned32, docsIf3CmEnergyMgt1x1CfgExitBitrateThrshld Unsigned32, docsIf3CmEnergyMgt1x1CfgExitTimeThrshld Unsigned32 } docsIf3CmEnergyMgt1x1CfgDirection OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index indicates whether the threshold applies to the upstream or downstream." ::= { docsIf3CmEnergyMgt1x1CfgEntry 1 } docsIf3CmEnergyMgt1x1CfgEntryBitrateThrshld OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the upstream or downstream bitrate threshold (in bps) below which the CM will request to enter Energy Management 1x1 Mode operation." ::= { docsIf3CmEnergyMgt1x1CfgEntry 2 } docsIf3CmEnergyMgt1x1CfgEntryTimeThrshld OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the number of consecutive seconds that the upstream or downstream data rate needs to remain below the Upstream or Downstream Entry Bitrate Threshold in order to determine that a transition to Energy Management 1x1 Mode is required." ::= { docsIf3CmEnergyMgt1x1CfgEntry 3 } docsIf3CmEnergyMgt1x1CfgExitBitrateThrshld OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the upstream or downstream bitrate threshold (in bps) above which the CM will request to leave Energy Management 1x1 Mode operation." ::= { docsIf3CmEnergyMgt1x1CfgEntry 4 } docsIf3CmEnergyMgt1x1CfgExitTimeThrshld OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the number of consecutive seconds that the upstream or downstream data rate needs to remain above the Upstream or Downstream Exit Bitrate Threshold in order to determine that a transition out of Energy Management 1x1 Mode is required." ::= { docsIf3CmEnergyMgt1x1CfgEntry 5 } docsIf3CmSpectrumAnalysisCtrlCmd OBJECT IDENTIFIER ::= { docsIf3MibObjects 34} docsIf3CmSpectrumAnalysisCtrlCmdEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to enable or disable the spectrum analyzer feature. Setting this attribute to true triggers the CM to initiate measurements for the spectrum analyzer feature based on the other configuration attributes for the feature. By default, the feature is disabled unless explicitly enabled. Note that the feature may be disabled by the system under certain circumstances if the spectrum analyzer would affect critical services. In such a case, the attribute will return 'false' when read, and will reject sets to 'true' with an error. Once the feature is enabled, any Set operation on the docsIf3CmSpectrumAnalysisCtrlCmd MIB group might not be effective until the feature is re-enabled again." DEFVAL { false } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 1 } docsIf3CmSpectrumAnalysisCtrlCmdInactivityTimeout OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the length of time after the last spectrum analysis measurement before the feature is automatically disabled. If set to a value of 0, the feature will remain enabled until it is explicitly disabled." DEFVAL { 300 } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 2 } docsIf3CmSpectrumAnalysisCtrlCmdFirstSegmentCenterFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the center frequency of the first segment for the spectrum analysis measurement. The frequency bins for this segment lie symmetrically to the left and right of this center frequency. If the number of bins in a segment is odd, the segment center frequency lies directly on the center bin. If the number of bins in a segment is even, the segment center frequency lies halfway between two bins. Changing the value of this attribute may result in changes to the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the attribute to the closest valid value." DEFVAL { 93000000 } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 3 } docsIf3CmSpectrumAnalysisCtrlCmdLastSegmentCenterFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the center frequency of the last segment of the spectrum analysis measurement. The frequency bins for this segment lie symmetrically to the left and right of this center frequency. If the number of bins in a segment is odd, the segment center frequency lies directly on the center bin. If the number of bins in a segment is even, the segment center frequency lies halfway between two bins. The value of the LastSegmentCenterFrequency attribute should be equal to the FirstSegmentCenterFrequency plus and integer number of segment spans as determined by the SegmentFrequencySpan. Changing the value of this attribute may result in changes to the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the attribute to the closest valid value." DEFVAL { 993000000 } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 4 } docsIf3CmSpectrumAnalysisCtrlCmdSegmentFrequencySpan OBJECT-TYPE SYNTAX Unsigned32 (1000000..900000000) UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the frequency span of each segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable. If set to a value of 0, then a default span will be chosen based on the hardware capabilities of the device. Segments are contiguous from the FirstSegementCenterFrequency to the LastSegmentCenterFrequency and the center frequency for each successive segment is incremented by the SegmentFequencySpan. The number of segments is (LastSegmentCenterFrequency - FirstSegmentCenterFrequency)/SegmentFrequencySpan + 1. A segment is equivalent to an instance in the docsIf3CmSpectrumAnalysisMeasTable. The chosen SegmentFrequencySpan affects the number of entries in the docsIf3CmSpectrumAnalysisMeasTable. A more granular SegmentFrequencySpan may adversely affect the amount of time needed to query the table entries in addition to possibly increasing the acquisition time. Changing the value of this attribute may result in changes to the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the object to the closest valid value." DEFVAL { 7500000 } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 5 } docsIf3CmSpectrumAnalysisCtrlCmdNumBinsPerSegment OBJECT-TYPE SYNTAX Unsigned32 (2..2048) UNITS "bins-per-segment" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the number of bins collected by the measurement performed for each segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the attribute to the closest valid value." DEFVAL { 256 } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 6 } docsIf3CmSpectrumAnalysisCtrlCmdEquivalentNoiseBandwidth OBJECT-TYPE SYNTAX Unsigned32 (50..500) UNITS "hundredthsbin" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the user to request an equivalent noise bandwidth for the resolution bandwidth filter used in the spectrum analysis. This corresponds to the spectral width of the window function used when performing a discrete Fourier transform for the analysis. The window function which corresponds to a value written to this object may be obtained by reading the value of the WindowFunction attribute. If an unsupported value is requested, the device may return an error, or choose the closest valid value to the one which is requested. If the closest value is chosen, then a subsequent read of this attribute will return the actual value which is in use." DEFVAL { 150 } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 7 } docsIf3CmSpectrumAnalysisCtrlCmdWindowFunction OBJECT-TYPE SYNTAX SpectrumAnalysisWindowFunction MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls or indicates the windowing function which will be used when performing the discrete Fourier transform for the analysis. The WindowFunction and the Equivalent Noise Bandwidth are related. If a particular WindowFunction is selected, then the EquivalentNoiseBandwidth for the function which is in use, will be reported by the EquivalentNoiseBandwidth attribute. Alternatively if an EquivalentNoiseBandwidth value is chosen then if a WindowFunction function representing that EquivalentNoiseBandwidth is defined in the CM, that value will be reported in the WindowFunction MIB object, or a value of 'other' will be reported. Use of 'modern' windowing functions not yet defined will likely be reported as 'other'. Note that all window functions may not be supported by all devices. If an attempt is made to set the object to an unsupported window function, or if writing of the WindowFunction is not supported, an error will be returned." ::= { docsIf3CmSpectrumAnalysisCtrlCmd 8 } docsIf3CmSpectrumAnalysisCtrlCmdNumberOfAverages OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the number of averages that will be performed on spectral bins. The average will be computed using the 'leaky integrator' method, where: reported bin value = alpha*accumulated bin values + (1-alpha)*current bin value. Alpha is one minus the reciprocal of the number of averages. For example, if N=25, then alpha = 0.96. A value of 1 indicates no averaging. Re-writing the number of averages will restart the averaging process. If there are no accumulated values, the accumulators are made equal to the first measured bin amplitudes. If an attempt is made to set the attribute to an unsupported number of averages, an error will be returned." DEFVAL { 1 } ::= { docsIf3CmSpectrumAnalysisCtrlCmd 9 } -- Note: This set of CtrlCmd objects is extended. -- The DOCS-PNM-MIB adds the following object id definitions: -- docsIf3CmSpectrumAnalysisCtrlCmdFileName ::= -- { docsIf3CmSpectrumAnalysisCtrlCmd 10 } -- docsIf3CmSpectrumAnalysisCtrlCmdFileEnable ::= -- { docsIf3CmSpectrumAnalysisCtrlCmd 11 } -- docsIf3CmSpectrumAnalysisCtrlCmdMeasStatus ::= -- { docsIf3CmSpectrumAnalysisCtrlCmd 12 } docsIf3CmSpectrumAnalysisMeasTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmSpectrumAnalysisMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides a list of spectral analysis measurements as performed across a range of center frequencies. The table is capable of representing a full scan of the spectrum." ::= { docsIf3MibObjects 35 } docsIf3CmSpectrumAnalysisMeasEntry OBJECT-TYPE SYNTAX DocsIf3CmSpectrumAnalysisMeasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row in the docsIf3CmSpectrumAnalysisMeasTable represents the spectral analysis around a single center frequency point in the spectrum." INDEX { docsIf3CmSpectrumAnalysisMeasFrequency } ::= { docsIf3CmSpectrumAnalysisMeasTable 1 } DocsIf3CmSpectrumAnalysisMeasEntry ::= SEQUENCE { docsIf3CmSpectrumAnalysisMeasFrequency Integer32, docsIf3CmSpectrumAnalysisMeasAmplitudeData AmplitudeData, docsIf3CmSpectrumAnalysisMeasTotalSegmentPower TenthdB } docsIf3CmSpectrumAnalysisMeasFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index indicates the center frequency of the spectral analysis span which is represented by this instance." ::= { docsIf3CmSpectrumAnalysisMeasEntry 1 } docsIf3CmSpectrumAnalysisMeasAmplitudeData OBJECT-TYPE SYNTAX AmplitudeData MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides a list of the spectral amplitudes as measured at the center frequency specified by the Frequency index. The frequency bins are ordered from lowest to highest frequencies covering the frequency span. Information about the center frequency, frequency span, number of bins and resolution bandwidth are included to provide context to the measurement point." ::= { docsIf3CmSpectrumAnalysisMeasEntry 2 } docsIf3CmSpectrumAnalysisMeasTotalSegmentPower OBJECT-TYPE SYNTAX TenthdB MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the total RF power present in the segment with the center frequency equal to the Frequency index and the span equal to the SegmentFrequencySpan. The value represents the sum of the spectrum power in all of the associated bins. The value is computed by summing power (not dB) values and converting the final sum to TenthdB." ::= { docsIf3CmSpectrumAnalysisMeasEntry 3 } docsIf3CmtsCmEmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmtsCmEmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines Energy Management mode statistics for the CM as reported by the CMTS. For example, such metrics can provide insight into configuration of appropriate EM 1x1 Mode Activity Detection thresholds on the CM and/or to get feedback on how/if the current thresholds are working well or are causing user experience issues." ::= { docsIf3MibObjects 36 } docsIf3CmtsCmEmStatsEntry OBJECT-TYPE SYNTAX DocsIf3CmtsCmEmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmtsCmEmStatsTable." INDEX { docsIf3CmtsCmRegStatusId } ::= { docsIf3CmtsCmEmStatsTable 1 } DocsIf3CmtsCmEmStatsEntry ::= SEQUENCE { docsIf3CmtsCmEmStatsEm1x1ModeTotalDuration Unsigned32 } docsIf3CmtsCmEmStatsEm1x1ModeTotalDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the total time duration, in seconds since registration, the CM identified by docsIf3CmtsCmRegStatusId has been in Energy Management 1x1 mode, as controlled by the DBC-REQ Energy Management 1x1 Mode Indicator TLV." ::= { docsIf3CmtsCmEmStatsEntry 1 } docsIf3CmEm1x1StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIf3CmEm1x1StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines Energy Management 1x1 mode statistics on the CM to provide insight into configuration of appropriate EM 1x1 Mode Activity Detection thresholds and/or to get feedback on how/if the current thresholds are working well or are causing user experience issues. These statistics are only applicable/valid when the Energy Management 1x1 mode is enabled in the CM." ::= { docsIf3MibObjects 37 } docsIf3CmEm1x1StatsEntry OBJECT-TYPE SYNTAX DocsIf3CmEm1x1StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsIf3CmEm1x1StatsTable. An instance exist for the CM MAC Domain Interface." INDEX { ifIndex } ::= { docsIf3CmEm1x1StatsTable 1 } DocsIf3CmEm1x1StatsEntry ::= SEQUENCE { docsIf3CmEm1x1StatsNumberTimesCrossedBelowUsEntryThrshlds Unsigned32, docsIf3CmEm1x1StatsNumberTimesCrossedBelowDsEntryThrshlds Unsigned32, docsIf3CmEm1x1StatsTotalDuration Unsigned32, docsIf3CmEm1x1StatsTotalDurationBelowUsThrshlds Unsigned32, docsIf3CmEm1x1StatsTotalDurationBelowDsThrshlds Unsigned32, docsIf3CmEm1x1StatsTotalDurationBelowUsDsThrshlds Unsigned32 } docsIf3CmEm1x1StatsNumberTimesCrossedBelowUsEntryThrshlds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the number of times since registration the CM crossed below the upstream entry bitrate threshold for a number of consecutive seconds equal to or exceeding the upstream entry time threshold." ::= { docsIf3CmEm1x1StatsEntry 1 } docsIf3CmEm1x1StatsNumberTimesCrossedBelowDsEntryThrshlds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the number of times since registration the CM crossed below the downstream entry bitrate threshold for a number of consecutive seconds equal to or exceeding the downstream entry time threshold." ::= { docsIf3CmEm1x1StatsEntry 2 } docsIf3CmEm1x1StatsTotalDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the total time duration, in seconds since registration, the CM has been in Energy Management 1x1 mode, as controlled by the DBC-REQ Energy Management 1x1 Mode Indicator TLV. This attribute differs from docsIf3CmEm1x1StatsTotalDurationBelowUsDsThrshlds because it is dependent on effects of the Energy Management Cycle Period, and processing of EM-REQ/EM-RSP messages and DBC messages that specifically indicate entry into or exit from Energy Management 1x1 mode." ::= { docsIf3CmEm1x1StatsEntry 3 } docsIf3CmEm1x1StatsTotalDurationBelowUsThrshlds OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the total time duration, in seconds since registration, the CM satisfied upstream conditions for entry into or remaining in Energy Management 1x1 mode." ::= { docsIf3CmEm1x1StatsEntry 4 } docsIf3CmEm1x1StatsTotalDurationBelowDsThrshlds OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the total time duration, in seconds since registration, the CM satisfied downstream conditions for entry into or remaining in Energy Management 1x1 mode." ::= { docsIf3CmEm1x1StatsEntry 5 } docsIf3CmEm1x1StatsTotalDurationBelowUsDsThrshlds OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the total time duration, in seconds since registration, the CM, with respect to both upstream and downstream entry and exit thresholds, satisfied conditions for entry into and remaining in Energy Management 1x1 mode. This attribute differs from docsIf3CmEm1x1StatsTotalDuration because it is not dependent on effects of the Energy Management Cycle Period or processing of EM-REQ/EM-RSP messages and DBC messages that specifically indicate entry into or exit from Energy Management 1x1 mode." ::= { docsIf3CmEm1x1StatsEntry 6 } -- Conformance Definitions docsIf3MibConformance OBJECT IDENTIFIER ::= { docsIf3Mib 2 } docsIf3MibCompliances OBJECT IDENTIFIER ::= { docsIf3MibConformance 1 } docsIf3MibGroups OBJECT IDENTIFIER ::= { docsIf3MibConformance 2 } docsIf3CmtsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the CMTS." MODULE -- this MODULE MANDATORY-GROUPS { docsIf3CmtsGroup, docsIf3CmtsNotificationGroup } OBJECT docsIf3CmtsCmUsStatusRangingStatus SYNTAX RangingState DESCRIPTION "The CMTS does not report 'timeoutT4'." ::= { docsIf3MibCompliances 1 } docsIf3CmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the CM." MODULE -- this MODULE MANDATORY-GROUPS { docsIf3CmGroup, docsIf3CmNotificationGroup } OBJECT docsIf3CmSpectrumAnalysisCtrlCmdWindowFunction MIN-ACCESS read-only DESCRIPTION "This object can be read-only for vendor implementations where the CM Spectrum Analysis window function is not configurable." ::= { docsIf3MibCompliances 2 } docsIf3CmtsGroup OBJECT-GROUP OBJECTS { docsIf3SignalQualityExtRxMER, docsIf3SignalQualityExtRxMerSamples, docsIf3MdNodeStatusMdDsSgId, docsIf3MdNodeStatusMdUsSgId, docsIf3MdDsSgStatusChSetId, docsIf3MdUsSgStatusChSetId, docsIf3CmtsSignalQualityExtCNIR, docsIf3CmtsSignalQualityExtExpectedRxSignalPower, docsIf3CmtsSpectrumAnalysisMeasAmplitudeData, docsIf3CmtsSpectrumAnalysisMeasTimeInterval, docsIf3CmtsSpectrumAnalysisMeasRowStatus, docsIf3CmtsCmRegStatusMacAddr, docsIf3CmtsCmRegStatusIPv6Addr, docsIf3CmtsCmRegStatusIPv6LinkLocal, docsIf3CmtsCmRegStatusIPv4Addr, docsIf3CmtsCmRegStatusValue, docsIf3CmtsCmRegStatusMdIfIndex, docsIf3CmtsCmRegStatusMdCmSgId, docsIf3CmtsCmRegStatusRcpId, docsIf3CmtsCmRegStatusRccStatusId, docsIf3CmtsCmRegStatusRcsId, docsIf3CmtsCmRegStatusTcsId, docsIf3CmtsCmRegStatusQosVersion, docsIf3CmtsCmRegStatusLastRegTime, docsIf3CmtsCmRegStatusAddrResolutionReqs, docsIf3CmtsCmRegStatusEnergyMgtEnabled, docsIf3CmtsCmRegStatusEnergyMgtOperStatus, docsIf3CmtsCmUsStatusModulationType, docsIf3CmtsCmUsStatusRxPower, docsIf3CmtsCmUsStatusSignalNoise, docsIf3CmtsCmUsStatusMicroreflections, docsIf3CmtsCmUsStatusEqData, docsIf3CmtsCmUsStatusUnerroreds, docsIf3CmtsCmUsStatusCorrecteds, docsIf3CmtsCmUsStatusUncorrectables, docsIf3CmtsCmUsStatusHighResolutionTimingOffset, docsIf3CmtsCmUsStatusIsMuted, docsIf3CmtsCmUsStatusRangingStatus, docsIf3UsChExtSacCodeHoppingSelectionMode, docsIf3UsChExtScdmaSelectionStringActiveCodes, docsIf3MdCfgMddInterval, docsIf3MdCfgIpProvMode, docsIf3MdCfgCmStatusEvCtlEnabled, docsIf3MdCfgUsFreqRange, docsIf3MdCfgMcastDsidFwdEnabled, docsIf3MdCfgMultRxChModeEnabled, docsIf3MdCfgMultTxChModeEnabled, docsIf3MdCfgEarlyAuthEncrCtrl, docsIf3MdCfgTftpProxyEnabled, docsIf3MdCfgSrcAddrVerifEnabled, docsIf3MdCfgDownChannelAnnex, docsIf3MdCfgCmUdcEnabled, docsIf3MdCfgSendUdcRulesEnabled, docsIf3MdCfgServiceTypeIdList, docsIf3MdCfgBpi2EnforceCtrl, docsIf3MdCfgEnergyMgt1x1Enabled, docsIf3MdChCfgIsPriCapableDs, docsIf3MdChCfgChId, docsIf3MdChCfgSfProvAttrMask, docsIf3MdChCfgRowStatus, docsIf3MdUsToDsChMappingMdIfIndex, docsIf3DsChSetChList, docsIf3UsChSetChList, docsIf3BondingGrpCfgChList, docsIf3BondingGrpCfgSfProvAttrMask, docsIf3BondingGrpCfgDsidReseqWaitTime, docsIf3BondingGrpCfgDsidReseqWarnThrshld, docsIf3BondingGrpCfgRowStatus, docsIf3DsBondingGrpStatusMdDsSgId, docsIf3DsBondingGrpStatusCfgId, docsIf3UsBondingGrpStatusMdUsSgId, docsIf3UsBondingGrpStatusCfgId, docsIf3RccStatusRccCfgId, docsIf3RccStatusValidityCode, docsIf3RccStatusValidityCodeText, docsIf3RxChStatusChIfIndex, docsIf3RxChStatusPrimaryDsIndicator, docsIf3RxChStatusRcRmConnectivityId, docsIf3RxModuleStatusRmRmConnectivityId, docsIf3RxModuleStatusFirstCenterFrequency, docsIf3CmtsCmCtrlCmdMacAddr, docsIf3CmtsCmCtrlCmdMuteUsChId, docsIf3CmtsCmCtrlCmdMuteInterval, docsIf3CmtsCmCtrlCmdDisableForwarding, docsIf3CmtsCmCtrlCmdCommit, docsIf3CmtsEventCtrlStatus, docsIf3CmtsCmEmStatsEm1x1ModeTotalDuration } STATUS current DESCRIPTION "Group of objects implemented in a DOCSIS 3.0 CMTS" ::= { docsIf3MibGroups 1 } docsIf3CmGroup OBJECT-GROUP OBJECTS { docsIf3SignalQualityExtRxMER, docsIf3SignalQualityExtRxMerSamples, docsIf3CmStatusValue, docsIf3CmStatusCode, docsIf3CmStatusResets, docsIf3CmStatusLostSyncs, docsIf3CmStatusInvalidMaps, docsIf3CmStatusInvalidUcds, docsIf3CmStatusInvalidRangingRsps, docsIf3CmStatusInvalidRegRsps, docsIf3CmStatusT1Timeouts, docsIf3CmStatusT2Timeouts, docsIf3CmStatusEnergyMgt1x1OperStatus, docsIf3CmStatusUsTxPower, docsIf3CmStatusUsT3Timeouts, docsIf3CmStatusUsT4Timeouts, docsIf3CmStatusUsRangingAborteds, docsIf3CmStatusUsModulationType, docsIf3CmStatusUsEqData, docsIf3CmStatusUsT3Exceededs, docsIf3CmStatusUsIsMuted, docsIf3CmStatusUsRangingStatus, docsIf3CmCapabilitiesReq, docsIf3CmCapabilitiesRsp, docsIf3UsChExtSacCodeHoppingSelectionMode, docsIf3UsChExtScdmaSelectionStringActiveCodes, docsIf3RxChStatusChIfIndex, docsIf3RxChStatusPrimaryDsIndicator, docsIf3RxChStatusRcRmConnectivityId, docsIf3RxModuleStatusRmRmConnectivityId, docsIf3RxModuleStatusFirstCenterFrequency, docsIf3CmDpvStatsLastMeasLatency, docsIf3CmDpvStatsLastMeasTime, docsIf3CmDpvStatsMinLatency, docsIf3CmDpvStatsMaxLatency, docsIf3CmDpvStatsAvgLatency, docsIf3CmDpvStatsNumMeas, docsIf3CmDpvStatsLastClearTime, docsIf3CmEventCtrlStatus, docsIf3CmMdCfgIpProvMode, docsIf3CmMdCfgIpProvModeResetOnChange, docsIf3CmMdCfgIpProvModeResetOnChangeHoldOffTimer, docsIf3CmMdCfgIpProvModeStorageType, docsIf3CmEnergyMgtCfgFeatureEnabled, docsIf3CmEnergyMgtCfgCyclePeriod, docsIf3CmEnergyMgt1x1CfgDirection, docsIf3CmEnergyMgt1x1CfgEntryBitrateThrshld, docsIf3CmEnergyMgt1x1CfgEntryTimeThrshld, docsIf3CmEnergyMgt1x1CfgExitBitrateThrshld, docsIf3CmEnergyMgt1x1CfgExitTimeThrshld, docsIf3CmSpectrumAnalysisCtrlCmdEnable, docsIf3CmSpectrumAnalysisCtrlCmdInactivityTimeout, docsIf3CmSpectrumAnalysisCtrlCmdFirstSegmentCenterFrequency, docsIf3CmSpectrumAnalysisCtrlCmdLastSegmentCenterFrequency, docsIf3CmSpectrumAnalysisCtrlCmdSegmentFrequencySpan, docsIf3CmSpectrumAnalysisCtrlCmdNumBinsPerSegment, docsIf3CmSpectrumAnalysisCtrlCmdEquivalentNoiseBandwidth, docsIf3CmSpectrumAnalysisCtrlCmdWindowFunction, docsIf3CmSpectrumAnalysisCtrlCmdNumberOfAverages, docsIf3CmSpectrumAnalysisMeasAmplitudeData, docsIf3CmSpectrumAnalysisMeasTotalSegmentPower, docsIf3CmEm1x1StatsNumberTimesCrossedBelowUsEntryThrshlds, docsIf3CmEm1x1StatsNumberTimesCrossedBelowDsEntryThrshlds, docsIf3CmEm1x1StatsTotalDuration, docsIf3CmEm1x1StatsTotalDurationBelowUsThrshlds, docsIf3CmEm1x1StatsTotalDurationBelowDsThrshlds, docsIf3CmEm1x1StatsTotalDurationBelowUsDsThrshlds } STATUS current DESCRIPTION "Group of objects implemented in a DOCSIS 3.0 CM" ::= { docsIf3MibGroups 2 } docsIf3CmtsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { docsIf3CmtsEventNotif } STATUS current DESCRIPTION "CMTS is required to support notifications in this group" ::= { docsIf3MibGroups 3 } docsIf3CmNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { docsIf3CmEventNotif } STATUS current DESCRIPTION "CM is required to support notifications in this group" ::= { docsIf3MibGroups 4 } docsIf3ObsoleteGroup OBJECT-GROUP OBJECTS { docsIf3RccCfgVendorSpecific, docsIf3RccCfgDescription, docsIf3RccCfgRowStatus, docsIf3RxChCfgChIfIndex, docsIf3RxChCfgPrimaryDsIndicator, docsIf3RxChCfgRcRmConnectivityId, docsIf3RxChCfgRowStatus, docsIf3RxModuleCfgRmRmConnectivityId, docsIf3RxModuleCfgFirstCenterFrequency, docsIf3RxModuleCfgRowStatus, docsIf3CmStatusUCCsSuccesses, docsIf3CmStatusUCCFails } STATUS obsolete DESCRIPTION "Group of objects not implemented on or for DOCSIS 3.1 devices." ::= { docsIf3MibGroups 5 } END