DOCS-LOADBAL3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32 FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION, RowStatus, TruthValue, MacAddress, TimeStamp, RowPointer FROM SNMPv2-TC -- [RFC2579] OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- [RFC2580] InterfaceIndexOrZero, InterfaceIndex, ifIndex FROM IF-MIB -- [RFC2863] SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 SnmpTagList FROM SNMP-TARGET-MIB -- [RFC 3413] RcpId, ChannelList, docsIf3CmtsCmRegStatusEntry FROM DOCS-IF3-MIB NodeName FROM CLAB-TOPO-MIB clabProjDocsis FROM CLAB-DEF-MIB; docsLoadbal3Mib MODULE-IDENTITY LAST-UPDATED "201507290000Z" -- July 29, 2015 ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO " Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: mibs@cablelabs.com" DESCRIPTION "This MIB module contains the management objects for the DOCSIS 3.0 CMTS Load Balanding operation. Copyright 1999-2009 Cable Television Laboratories, Inc. All rights reserved." REVISION "201507290000Z" -- July 29, 2015 DESCRIPTION "Revised Version includes ECN CCAP-OSSI-N-15.1336-2." REVISION "201001150000Z" -- January 15, 2010 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-09.0871-4 and published as I11" REVISION "200905290000Z" -- May 29, 2009 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-09.0773-1 OSSIv3.0-N-09.0775-3 OSSIv3.0-N-09.0777-2 and published as I09" REVISION "200901210000Z" -- January 21, 2009 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-08.0651-3 OSSIv3.0-N-08.0700-4 and published as I08" REVISION "200805220000Z" -- May 22, 2008 DESCRIPTION "Revised Version includes ECN OSSIv3.0-N-08.0645-4 and published as I07" REVISION "200712060000Z" -- December 6, 2007 DESCRIPTION "Initial version, published as part of the CableLabs OSSIv3.0 specification CM-SP-OSSIv3.0-I05-071206 via ECN OSSIv3.0-N-07.0522-7" ::= { clabProjDocsis 22} -- Textual Conventions ChChgInitTechMap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type enumerates the allowed initialization techniques for Dynamic Channel Change (DCC) and Dynamic Bonding Change (DBC) operations. The techniques are represented by the 5 most significant bits (MSB). Bits 0 through 4 map to initialization techniques 0 through 4. Each bit position represents the internal associated technique as described below: 'reinitializeMac' Reinitialize the MAC 'broadcastInitRanging' Perform Broadcast initial ranging on new channel before normal operation 'unicastInitRanging' Perform unicast ranging on new channel before normal operation 'initRanging' Perform either broadcast or unicast ranging on new channel before normal operation 'direct' Use the new channel(s) directly without re-initializing or ranging Multiple bits may be set to 1 to allow the CMTS to select the most suitable technique in a proprietary manner. An empty value or a value with all bits in '0' means no channel changes allowed" REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." SYNTAX BITS { reinitializeMac(0), broadcastInitRanging(1), unicastInitRanging(2), initRanging(3), direct(4) } docsLoadbal3MibObjects OBJECT IDENTIFIER ::= { docsLoadbal3Mib 1 } docsLoadbal3System OBJECT IDENTIFIER ::= { docsLoadbal3MibObjects 1 } docsLoadbal3SystemEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute when set to 'true' enables Autonomous Load Balancing operation on the CMTS, otherwise Autonomous Load Balancing is disabled. A failure to enable Autonomous Load Balancing operation is registered in the EnableError attribute. When Autonomous Load Balancing is enabled, the CMTS may reject Externally-Directed Load Balancing operations. However, even when Autonomous Load Balancing is disabled, the CMTS is required to assign load balancing parameters to CMs as provisioned in the configuration file and/or RestrictCM object. This attribute value persists after system reinitialization. There might be cases where this attribute reports a failure and Load Balancing is enabled, for example after system reinitialization where Load Balancing was previously set to enabled but there are issues with the CMTS configuration." REFERENCE "DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I07-080522 Externally-Directed Load Balancing section." DEFVAL { true } ::= { docsLoadbal3System 1 } docsLoadbal3SystemEnableError OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents a text message that describes a failure to enable load balancing due configuration errors, or other considerations. The zero-length string indicates no errors occurred during the last Autonomous Load Balancing activation." ::= { docsLoadbal3System 2 } docsLoadbal3ChgOverGroup OBJECT IDENTIFIER ::= { docsLoadbal3MibObjects 2 } docsLoadbal3ChgOverGroupMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the MAC address of the cable modem that the CMTS instructs to move to a new downstream and/or upstream channel set." DEFVAL { '000000000000'H } ::= { docsLoadbal3ChgOverGroup 1 } docsLoadbal3ChgOverGroupInitTech OBJECT-TYPE SYNTAX ChChgInitTechMap MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the initialization technique that the cable modem is instructed to use when performing multiple-channel change-over operation. The value of this attribute applies to all upstream channels in the channel set." ::= { docsLoadbal3ChgOverGroup 2 } docsLoadbal3ChgOverGroupForceUCC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute when set to 'true' indicates that the CMTS forces UCC messages instead of DCC messages in those scenarios that are allowed as defined in the Upstream Channel Change Request (UCC-REQ) section of MULPI. In some cases the CMTS may still use UCC commands even though this attribute value is 'false', for example in an upstream-only change-over operation directed to a CM that the CMTS is aware is only capable of UCC, but the operator is not aware of the CM capabilities. This attribute value is ignored when the target CM for the change-over operation is in MRC mode, or the UsChSet attribute is the zero-length string, or the operation includes changes for downstream channels." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I12-100115, section 6.4.10 Upstream Channel Change Request (UCC-REQ)." DEFVAL { false } ::= { docsLoadbal3ChgOverGroup 3 } docsLoadbal3ChgOverGroupdownFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents a single-downstream frequency to which the cable modem is instructed to move using a DCC request. The value zero indicates that this attribute is ignored during a commit operation." DEFVAL { 0 } ::= { docsLoadbal3ChgOverGroup 4 } docsLoadbal3ChgOverGroupMdIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute describes the MAC Domain Interface index of the triplet: Mac Domain, RCP-ID and RCC Status Index of the RccStatus object that represents the RCC used in the change-over operation. This MAC Domain Interface Index is also used to provide context for the UsChSet and ServiceFlowInfo attributes." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, CM Receive Channel (RCP/RCC) Encodings section and DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I05-071206, RCC Status Objects section." DEFVAL { 0 } ::= { docsLoadbal3ChgOverGroup 5 } docsLoadbal3ChgOverGroupRcpId OBJECT-TYPE SYNTAX RcpId MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute describes the RCP-ID of the triplet: Mac Domain, RCP-ID and RCC Status Index of the RccStatus object that represents the RCC used in the change-over operation." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522 CM Receive Channel (RCP/RCC) Encodings section and DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I05-071206, RCC Status Objects section." DEFVAL { '0000000000'H } ::= { docsLoadbal3ChgOverGroup 6 } docsLoadbal3ChgOverGroupRccId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute describes the RCC Status Index of the triplet: Mac Domain, RCP-ID and RCC Status Index of the RccStatus object that represents the RCC used in the change-over operation." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, CM Receive Channel (RCP/RCC) Encodings section and DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I05-071206 RCC Status Objects section." DEFVAL { 0 } ::= { docsLoadbal3ChgOverGroup 7 } docsLoadbal3ChgOverGroupUsChSet OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute describes the Channel list (within the context of the MAC domain identified by MdIfIndex) that represents the final TCS expected from the change-over operation. When the operation is intended for an RCC-only, this attribute is set to zero and the attribute InitTech is ignored." DEFVAL { ''H } ::= { docsLoadbal3ChgOverGroup 8 } docsLoadbal3ChgOverGroupServiceFlowInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a list of Service Flow ID-Channel Set ID pairs used to control Service Flow assignment in the change-over operation. This is intended as an override to the normal assignment based on SF attributes. This attribute is encoded as a series of 32-bit pairs as follows: - The first four bytes correspond to the value of the Service Flow ID (attribute Id of the ServiceFlow object of the DOCSIS QOS objects. - The last four bytes correspond to the value of the attribute ChSetId of the UsChSet or DsChSet object of the CMTS Bonding Objects. If this attribute does not include tuples for some of the CM's Service Flows, the CMTS determines the respective channels based on SF attributes. Service Flow ID-Channel Set ID pairs matching upstream service flows are ignored if the change-over operation does not affect the TCC of the CM. Similarly, Service Flow ID-Channel Set ID pairs matching downstream service flows are ignored if the change-over operation does not affect the RCC of the CM." DEFVAL { ''H } ::= { docsLoadbal3ChgOverGroup 9 } docsLoadbal3ChgOverGroupTransactionId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents an operator identifier for the change-over operation to be used to correlate logged information in the ChangeOver3 Status object. The CMTS uses this value as the Transaction ID in the DBC-REQ or DCC-REQ message transmitted in association with this operation. If this value is set to zero the CMTS defines its own MAC message Transaction ID value." DEFVAL { 0 } ::= { docsLoadbal3ChgOverGroup 10 } docsLoadbal3ChgOverGroupCommit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute when set to 'true' triggers the change-over operation for Externally-Directed Load Balancing. Setting this attribute to 'true' is known as a commit operation. A commit operation is considered successful if the CMTS considers that the entered information is valid and the transaction can be initiated. It does not imply that the channel-change operation itself (i.e. UCC, DCC, DBC transaction) reports success or completion. A commit operation is considered unsuccessful if the CMTS determines that there are invalid attributes values in the ChangeOver object such that the change-over operation cannot be initiated. Some examples for a change-over that cannot be initiated are: - Attempt to send a DBC for MRC that does not fit the CM RCP. - Attempt to send a DCC while a previous one is still in progress. - Attempt to send a UCC to a channel ID that is not defined. After system initialization all ChangeOver object parameters are set to default values. After a successful commit operation all ChangeOver object parameters are set to default values with the exception of this attribute (commit) that is set to 'true'. An unsuccessful commit operation is rejected and this attribute reports false in subsequent value queries. After a successful commit operation, the CMTS initiates the change-over transaction using the most appropriate technique. The potential techniques are: - UCC - For upstream-channel-only changes on CMs not operating in MRC mode. - DCC - For upstream and/or downstream channel changes on CMs not operating in MRC mode. - DCC followed by channel assignment in REG-RSP-MP - For MAC Domain re-assignment on CMs operating in MRC mode, as well as upstream only change for CMs operating in MRC mode but with no TCS conveyed during registration. In this case, the change-over command might only include a downstream frequency, or might include an RCC defined in the target MAC domain. The upstream channel set may or may not be provided. The only applicable Initialization Technique for this operation is 'reinitializeMAC'. - DBC - For change in the TCS and/or RCS on CMs operating in MRC mode." DEFVAL { false } ::= { docsLoadbal3ChgOverGroup 11 } docsLoadbal3ChgOverGroupLastCommit OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the attribute Commit was last set to true. Zero if never set." ::= { docsLoadbal3ChgOverGroup 12 } docsLoadbal3ChgOverStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3ChgOverStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object reports the status of cable modems instructed to move to a new downstream and/or upstream channel or channel sets when commanded either by an operation in the ChgOver object. An instance in this object is created for each change-over operation committed successfully. If the instance value attribute is not final (the change-over operation is still pending completion), this instance is expected to be updated at some point later to reflect the final state of the change-over operation." ::= { docsLoadbal3MibObjects 3} docsLoadbal3ChgOverStatusEntry OBJECT-TYPE SYNTAX DocsLoadbal3ChgOverStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3ChgOverStatus." INDEX { docsLoadbal3ChgOverStatusId } ::= { docsLoadbal3ChgOverStatusTable 1 } DocsLoadbal3ChgOverStatusEntry ::= SEQUENCE { docsLoadbal3ChgOverStatusId Unsigned32, docsLoadbal3ChgOverStatusMacAddr MacAddress, docsLoadbal3ChgOverStatusInitTech ChChgInitTechMap, docsLoadbal3ChgOverStatusDownFrequency Unsigned32, docsLoadbal3ChgOverStatusMdIfIndex InterfaceIndex, docsLoadbal3ChgOverStatusRcpId RcpId, docsLoadbal3ChgOverStatusRccId Unsigned32, docsLoadbal3ChgOverStatusUsChSet ChannelList, docsLoadbal3ChgOverStatusServiceFlowInfo OCTET STRING, docsLoadbal3ChgOverStatusCmd INTEGER, docsLoadbal3ChgOverStatusTransactionId Unsigned32, docsLoadbal3ChgOverStatusValue INTEGER, docsLoadbal3ChgOverStatusUpdate TimeStamp } docsLoadbal3ChgOverStatusId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents a monotonically increasing value for the record that stores the status of the change-over operation. When the ChOverStatus object exceeds the size limit of this object the lowest Id value instances are removed so that the total number of entries no longer exceeds the size limit allowing the CMTS to maintain the most current entries." ::= { docsLoadbal3ChgOverStatusEntry 1 } docsLoadbal3ChgOverStatusMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Mac address set in the ChgOver object commit operation." ::= { docsLoadbal3ChgOverStatusEntry 2 } docsLoadbal3ChgOverStatusInitTech OBJECT-TYPE SYNTAX ChChgInitTechMap MAX-ACCESS read-only STATUS current DESCRIPTION "The initialization technique set in change-over operation." ::= { docsLoadbal3ChgOverStatusEntry 3 } docsLoadbal3ChgOverStatusDownFrequency OBJECT-TYPE SYNTAX Unsigned32 (0..1000000000) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the new downstream frequency to which the cable modem is instructed to move. The value 0 indicates that the CMTS does not create a TLV for the downstream frequency in the DCC-REQ message. This object has no meaning when executing UCC operations." ::= { docsLoadbal3ChgOverStatusEntry 4 } docsLoadbal3ChgOverStatusMdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the MAC Domain Interface index set in the ChgOver3 object commit operation, or zero." ::= { docsLoadbal3ChgOverStatusEntry 5 } docsLoadbal3ChgOverStatusRcpId OBJECT-TYPE SYNTAX RcpId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the RCP-ID set in the MultipleChChgOver object commit operation, or all zeros RCP-ID. The CMTS implements this object for CMs in 3.0 mode, but it is not applicable for CMs in 3.1 mode." REFERENCE -- Update reference to 3.1 MULPI "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I08-080522, RCP-ID section in the Common Radio Frequency Interface Encodings Annex." ::= { docsLoadbal3ChgOverStatusEntry 6 } docsLoadbal3ChgOverStatusRccId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the RCC Status Index set in the ChgOver3 object commit operation, or zero." ::= { docsLoadbal3ChgOverStatusEntry 7 } docsLoadbal3ChgOverStatusUsChSet OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Upstream Channel Set ID in the ChgOver3 object commit operation, or zero. The CMTS implements this object for CMs in 3.0 mode, but it is not applicable for CMs in 3.1 mode." ::= { docsLoadbal3ChgOverStatusEntry 8 } docsLoadbal3ChgOverStatusServiceFlowInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..484)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the list of Service Flow-Channel Set ID pairs set in the ChgOver object commit operation, or zero-length string." ::= { docsLoadbal3ChgOverStatusEntry 9 } docsLoadbal3ChgOverStatusCmd OBJECT-TYPE SYNTAX INTEGER { ucc(1), dcc(2), dbc(3), crossMD(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The load balancing MAC Management Message exchange type used by the CMTS for the change-over operation in the ChgOver object commit operation. - 'ucc' indicates the usage of Upstream Channel Change (UCC) messages exchange. - 'dcc' indicates the usage of Dynamic Channel Change (DCC) messages exchange. - 'dbc' indicates the usage of Dynamic Bonding Change (DCC) messages exchange - 'crossMD' although this term does not correspond to a MAC Management Message type, it indicates the movement of a CM to a different MAC Domain that includes a sequence of different MAC Management Messages types (i.e. DCC to move the CM to the correct MAC Domain, followed by channel assignment in REG-RSP-MP)." ::= { docsLoadbal3ChgOverStatusEntry 10 } docsLoadbal3ChgOverStatusTransactionId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the transaction Id value used in the change-over operation." ::= { docsLoadbal3ChgOverStatusEntry 11 } docsLoadbal3ChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10), dbcTimeout(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the status of the specified change-over operation. The enumerations are: Change-over using DCC message exchange: 'modemDeparting' The cable modem has responded with a change-over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. 'timeOutT13' Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. 'timeOutT15' T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. Change-over using DBC message exchange: 'dbcTimeout' The number of DBC-REQ retries was exceeded and no DBC-RSP was received Change-over CMTS verifications: 'messageSent' The CMTS has sent a DOCSIS MAC message request to instruct the CM to do the change-over operation. 'noOpNeed' A change-over operation was requested in which neither the DS and US channels where the CM is operational changed. 'waitToSendMessage' The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. 'cmOperationRejected' Channel Change operation was rejected by the cable modem. 'cmtsOperationRejected' Channel Change operation was rejected by the Cable Modem Termination System. 'rejectInit' Operation rejected due to unsupported initialization tech requested. 'success' CMTS received an indication that the CM successfully completed the change-over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180) or DBC confirmation code ok/success. In all other DCC cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel(s)." ::= { docsLoadbal3ChgOverStatusEntry 12 } docsLoadbal3ChgOverStatusUpdate OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the attribute value of this instance was last updated." ::= { docsLoadbal3ChgOverStatusEntry 13 } docsLoadbal3CmtsCmParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3CmtsCmParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the autonomous load balancing parameters provisioned for cable modem. The CMTS selects the cable modem Load Balancing Group (GrpId attribute of this object) from multiple sources by following the rules and sequence described below: The CMTS selects the assignment of the CM to a Load Balancing Group by determining first if the CM is in a Restricted Load Balancing Group or in its absence to the General Load Balancing group that corresponds to the MD-CM-SG of the CM. The selection of the Restricted Load Balancing group is achieved by first matching the CM in the RestrictCmCfg Object and if no match is found, by selecting the best match within the ResGrpCfg object. The best match within the ResGrpCfg follows the MULPI requirements on precedences of the CM signaled TLVs: ServiceType ID and Load Balancing Group ID (for backward compatibility of provisioned Group IDs)." REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." ::= { docsLoadbal3MibObjects 4} docsLoadbal3CmtsCmParamsEntry OBJECT-TYPE SYNTAX DocsLoadbal3CmtsCmParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3CmtsCmParams." AUGMENTS { docsIf3CmtsCmRegStatusEntry } ::= { docsLoadbal3CmtsCmParamsTable 1 } DocsLoadbal3CmtsCmParamsEntry ::= SEQUENCE { docsLoadbal3CmtsCmParamsProvGrpId Unsigned32, docsLoadbal3CmtsCmParamsCurrentGrpId Unsigned32, docsLoadbal3CmtsCmParamsProvServiceTypeID SnmpAdminString, docsLoadbal3CmtsCmParamsCurrentServiceTypeID SnmpAdminString, docsLoadbal3CmtsCmParamsPolicyId Unsigned32, docsLoadbal3CmtsCmParamsPriority Unsigned32 } docsLoadbal3CmtsCmParamsProvGrpId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the provisioned Load Balancing Group ID TLV the CM signaled to the CMTS during registration, or zero if not provisioned in the CM." ::= { docsLoadbal3CmtsCmParamsEntry 1 } docsLoadbal3CmtsCmParamsCurrentGrpId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute references the Load Balancing Group Identifier (Id attribute from the GrpStatus object) associated with the cable modem after the CMTS validates the CM Load Balancing Group ID TLV, Service Type ID TLV and Restricted CM list. The value zero indicates that the Load Balancing Group is invalid, or the General Load Balancing Group is invalid due ambiguous topology resolution." ::= { docsLoadbal3CmtsCmParamsEntry 2 } docsLoadbal3CmtsCmParamsProvServiceTypeID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the provisioned Service Type ID TLV the CM signaled to the CMTS during registration, or the zero-length string if not provisioned in the CM." ::= { docsLoadbal3CmtsCmParamsEntry 3 } docsLoadbal3CmtsCmParamsCurrentServiceTypeID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Service Type ID the CMTS picked from the Restricted Group of Restricted CM list, or the Service Type Id TLV the CM signaled to the CMTS during registration, or the zero-length string if none was used." ::= { docsLoadbal3CmtsCmParamsEntry 4 } docsLoadbal3CmtsCmParamsPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute references the Load Balancing Policy ID associated to the cable modem either from the configuration file or from the General or Restricted Load Balancing Groups CMTS configuration." ::= { docsLoadbal3CmtsCmParamsEntry 5 } docsLoadbal3CmtsCmParamsPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute references the Load Balancing Priority associated to the cable modem either from the configuration file or from the General or Restricted Load Balancing Groups CMTS configuration." ::= { docsLoadbal3CmtsCmParamsEntry 6 } docsLoadbal3GeneralGrpDefaults OBJECT IDENTIFIER ::= { docsLoadbal3MibObjects 5 } docsLoadbal3GeneralGrpDefaultsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the Enable attribute of the GeneralLoadBalGrp object." DEFVAL { true } ::= { docsLoadbal3GeneralGrpDefaults 1 } docsLoadbal3GeneralGrpDefaultsPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the PolicyId attribute of the GeneralLoadBalGrp object." DEFVAL { 0 } ::= { docsLoadbal3GeneralGrpDefaults 2 } docsLoadbal3GeneralGrpDefaultsInitTech OBJECT-TYPE SYNTAX ChChgInitTechMap MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the InitTechnique attribute of the GeneralLoadBalGrp object." DEFVAL { 'F8'H } ::= { docsLoadbal3GeneralGrpDefaults 3 } docsLoadbal3GeneralGrpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3GeneralGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides the parameters for the General Load Balancing Groups of MD-CM-SGs associated with MAC Domain-Fiber Node pairs. This object allows configuration of load balancing parameters for General Load Balancing Groups by way of MAC Domain-Fiber Node pairs. In many deployments, a MAC Domain-Fiber Node pair will equate to an MD-CM-SG (which always equates to a GLBG). In the case where an MD-CM-SG spans multiple Fiber Nodes, there will be multiple instances of this object that represent the General Load Balancing Group (MD-CM-SG). The CMTS enforces that such instances all have the same attribute values. Any time a fiber node is associated to a MAC Domain an instance of this object is defined by the CMTS and populated with either the same values as the other fiber nodes associated with the same MD-CM-SG (if any exist) or default values from the GeneralGrpDefaults object. Similarly when a fiber node is no longer paired with a MAC Domain the corresponding instance is deleted from the object." ::= { docsLoadbal3MibObjects 6} docsLoadbal3GeneralGrpCfgEntry OBJECT-TYPE SYNTAX DocsLoadbal3GeneralGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3GeneralGrpCfg. The CMTS persists all instances of GeneralGrpCfg across reinitializations." INDEX { ifIndex,docsLoadbal3GeneralGrpCfgNodeName } ::= { docsLoadbal3GeneralGrpCfgTable 1 } DocsLoadbal3GeneralGrpCfgEntry ::= SEQUENCE { docsLoadbal3GeneralGrpCfgNodeName NodeName, docsLoadbal3GeneralGrpCfgEnable TruthValue, docsLoadbal3GeneralGrpCfgPolicyId Unsigned32, docsLoadbal3GeneralGrpCfgInitTech ChChgInitTechMap } docsLoadbal3GeneralGrpCfgNodeName OBJECT-TYPE SYNTAX NodeName MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the fiber node name being associated with a MAC Domain." ::= { docsLoadbal3GeneralGrpCfgEntry 1 } docsLoadbal3GeneralGrpCfgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute when set to 'true' enables Autonomous Load Balancing for the General Load Balancing Group associated with this instance. When set to 'false' Autonomous Load Balancing is disabled." ::= { docsLoadbal3GeneralGrpCfgEntry 2 } docsLoadbal3GeneralGrpCfgPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the default load balancing policy for the General Load Balancing Group associated with this instance." ::= { docsLoadbal3GeneralGrpCfgEntry 3 } docsLoadbal3GeneralGrpCfgInitTech OBJECT-TYPE SYNTAX ChChgInitTechMap MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the load balancing initialization technique for the General Load Balancing Group associated with this instance." ::= { docsLoadbal3GeneralGrpCfgEntry 4 } docsLoadbal3ResGrpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3ResGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the configuration of Restricted Load Balancing Groups." ::= { docsLoadbal3MibObjects 7} docsLoadbal3ResGrpCfgEntry OBJECT-TYPE SYNTAX DocsLoadbal3ResGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3ResGrpCfg. The CMTS persists all instances of ResGrpCfg across reinitializations." INDEX { docsLoadbal3ResGrpCfgId } ::= { docsLoadbal3ResGrpCfgTable 1 } DocsLoadbal3ResGrpCfgEntry ::= SEQUENCE { docsLoadbal3ResGrpCfgId Unsigned32, docsLoadbal3ResGrpCfgMdIfIndex InterfaceIndexOrZero, docsLoadbal3ResGrpCfgDsChList ChannelList, docsLoadbal3ResGrpCfgUsChList ChannelList, docsLoadbal3ResGrpCfgEnable TruthValue, docsLoadbal3ResGrpCfgInitTech ChChgInitTechMap, docsLoadbal3ResGrpCfgPolicyId Unsigned32, docsLoadbal3ResGrpCfgServiceTypeId SnmpTagList, docsLoadbal3ResGrpCfgStatus RowStatus } docsLoadbal3ResGrpCfgId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents a unique index assigned to the Restricted Load Balancing Group by the user for provisioning purposes. This value is unique within a CMTS and is matched with the CM signaled Load Balancing Group ID TLV value when determining the CM Load Balancing Group assignment based on such TLV value." REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." ::= { docsLoadbal3ResGrpCfgEntry 1 } docsLoadbal3ResGrpCfgMdIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the MAC domain where the Restricted Load balancing Group applies. The value zero is allowed to indicate that vendor-specific mechanisms are used to define the Restricted Load Balancing Group. For example, to provide Load Balancing Groups across MAC domains. " ::= { docsLoadbal3ResGrpCfgEntry 2 } docsLoadbal3ResGrpCfgDsChList OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the list of downstream channels of the Restricted Load Balancing Group." DEFVAL { ''H } ::= { docsLoadbal3ResGrpCfgEntry 3 } docsLoadbal3ResGrpCfgUsChList OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the list of upstream channels of the Restricted Load Balancing Group." DEFVAL { ''H } ::= { docsLoadbal3ResGrpCfgEntry 4 } docsLoadbal3ResGrpCfgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute when set to 'true' enables Autonomous Load Balancing on this Restricted Load Balancing Group. The value 'false' disables the load balancing operation on this group." DEFVAL { true } ::= { docsLoadbal3ResGrpCfgEntry 5 } docsLoadbal3ResGrpCfgInitTech OBJECT-TYPE SYNTAX ChChgInitTechMap MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the initialization techniques that the CMTS can use to load balance cable modems in the Load Balancing Group." DEFVAL {'F8'H } ::= { docsLoadbal3ResGrpCfgEntry 6 } docsLoadbal3ResGrpCfgPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the default load balancing policy of this Restricted Load Balancing Group. A policy is described by a set of conditions (rules) that govern the load balancing process for a cable modem. The CMTS assigns this Policy ID value to a cable modem associated with the group ID when the cable modem does not signal a Policy ID during registration. The Policy ID value is intended to be a numeric reference to an instance of the Policy object. However, It is not required to have an existing or active policy instance in which case it indicates no policy is associated with the Load Balancing Group. The Policy ID of value 0 is reserved to indicate no policy is associated with the load balancing group." DEFVAL { 0 } ::= { docsLoadbal3ResGrpCfgEntry 7 } docsLoadbal3ResGrpCfgServiceTypeId OBJECT-TYPE SYNTAX SnmpTagList MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represent a space separated list of ServiceType IDs that will be compared against the cable modem provisioned Service Type ID to determine the most appropriate Restricted Load Balancing Group." REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." ::= { docsLoadbal3ResGrpCfgEntry 8 } docsLoadbal3ResGrpCfgStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The conceptual row status of this object." ::= { docsLoadbal3ResGrpCfgEntry 9 } docsLoadbal3GrpStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3GrpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the status of all General and Restricted Load Balancing Groups in this CMTS. This object summarizes the load balancing parameters that applies to CMTS system wide Load Balancing Groups. The Load Balancing Groups defined in this object include the configured Restricted Load Balancing Groups and the General Load Balancing Groups derived from the GeneralGrpCfg object." ::= { docsLoadbal3MibObjects 8} docsLoadbal3GrpStatusEntry OBJECT-TYPE SYNTAX DocsLoadbal3GrpStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3GrpStatus." INDEX { docsLoadbal3GrpStatusId } ::= { docsLoadbal3GrpStatusTable 1 } DocsLoadbal3GrpStatusEntry ::= SEQUENCE { docsLoadbal3GrpStatusId Unsigned32, docsLoadbal3GrpStatusCfgIdOrZero Unsigned32, docsLoadbal3GrpStatusMdIfIndex InterfaceIndexOrZero, docsLoadbal3GrpStatusMdCmSgId Unsigned32, docsLoadbal3GrpStatusDsChList ChannelList, docsLoadbal3GrpStatusUsChList ChannelList, docsLoadbal3GrpStatusEnable TruthValue, docsLoadbal3GrpStatusInitTech ChChgInitTechMap, docsLoadbal3GrpStatusPolicyId Unsigned32, docsLoadbal3GrpStatusChgOverSuccess Counter32, docsLoadbal3GrpStatusChgOverFails Counter32 } docsLoadbal3GrpStatusId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents an unique identifier of a Load Balancing Group in the CMTS." ::= { docsLoadbal3GrpStatusEntry 1 } docsLoadbal3GrpStatusCfgIdOrZero OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute references the Id attribute of the instance of the ResGrpCfg this instance corresponds to. The value zero indicates that the instance corresponds to a General Load Balancing Group." ::= { docsLoadbal3GrpStatusEntry 2 } docsLoadbal3GrpStatusMdIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the MAC domain where the Load Balancing Group applies. The value zero is allowed to indicate that vendor-specific mechanisms are used in load balancing operations. For example, to provide Load Balancing Groups across MAC domains." ::= { docsLoadbal3GrpStatusEntry 3 } docsLoadbal3GrpStatusMdCmSgId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the MD-CM-SG-ID that includes all the upstream and downstream channels of the Load Balancing Group. The value zero indicates that this instance corresponds to a Restricted Load Balancing Group. If there are vendor-specific Load Balancing Groups configuration ( e.g. MdIfIndex set to zero), this attribute value might not be meaningful." ::= { docsLoadbal3GrpStatusEntry 4 } docsLoadbal3GrpStatusDsChList OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the list of downstream channels of the Load Balancing Group. If there are vendor-specific Load Balancing Groups configuration ( e.g. MdIfIndex set to zero), this attribute value might not be meaningful." ::= { docsLoadbal3GrpStatusEntry 5 } docsLoadbal3GrpStatusUsChList OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the list of the upstream channels of the Load Balancing Group. If there are vendor-specific Load Balancing Groups configuration ( e.g. MdIfIndex set to zero), this attribute value might not be meaningful." ::= { docsLoadbal3GrpStatusEntry 6 } docsLoadbal3GrpStatusEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute when set to 'true' indicates that load balancing is enabled on this group, or disabled if set to 'false'." ::= { docsLoadbal3GrpStatusEntry 7 } docsLoadbal3GrpStatusInitTech OBJECT-TYPE SYNTAX ChChgInitTechMap MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the initialization techniques that the CMTS can use when load balancing cable modems that are associated with the Load Balancing Group." ::= { docsLoadbal3GrpStatusEntry 8 } docsLoadbal3GrpStatusPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the Policy that the CMTS can use when load balancing cable modems that are associated with the Load Balancing Group." ::= { docsLoadbal3GrpStatusEntry 9 } docsLoadbal3GrpStatusChgOverSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of successful Autonomous Load Balancing operations associated with this Load Balancing Group. " ::= { docsLoadbal3GrpStatusEntry 10 } docsLoadbal3GrpStatusChgOverFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of failed Autonomous load balancing operations associated with this Load Balancing Group." ::= { docsLoadbal3GrpStatusEntry 11 } docsLoadbal3RestrictCmCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3RestrictCmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the list of cable modems being statically provisioned at the CMTS to a Restricted Load Balancing Group. When a CM registers it is either assigned to " ::= { docsLoadbal3MibObjects 9} docsLoadbal3RestrictCmCfgEntry OBJECT-TYPE SYNTAX DocsLoadbal3RestrictCmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3RestrictCmCfg. The CMTS MUST persist all instances of RestrictCmCfg across reinitializations." INDEX { docsLoadbal3RestrictCmCfgId } ::= { docsLoadbal3RestrictCmCfgTable 1 } DocsLoadbal3RestrictCmCfgEntry ::= SEQUENCE { docsLoadbal3RestrictCmCfgId Unsigned32, docsLoadbal3RestrictCmCfgMacAddr MacAddress, docsLoadbal3RestrictCmCfgMacAddrMask MacAddress, docsLoadbal3RestrictCmCfgGrpId Unsigned32, docsLoadbal3RestrictCmCfgServiceTypeId OCTET STRING, docsLoadbal3RestrictCmCfgStatus RowStatus } docsLoadbal3RestrictCmCfgId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the unique identifier of an instance in this object. the CMTS maintains an unique instance per MAC Address/MAC Address Mask combination" ::= { docsLoadbal3RestrictCmCfgEntry 1 } docsLoadbal3RestrictCmCfgMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the Mac Address of the cable modem within the Restricted Load Balancing Group." DEFVAL { '000000000000'H } ::= { docsLoadbal3RestrictCmCfgEntry 2 } docsLoadbal3RestrictCmCfgMacAddrMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute corresponds to a bit mask acting as a wild card to associate a cable modem MAC addresses to a Restricted Load Balancing Group ID referenced by a restricted group Id or a Service Type ID. The cable modem matching criteria is performed by bit-Anded the cable modem MAC address with the MacAddrMAsk attribute and being compared with the bit-ANDed of attributes MacdAddr and MacAddrMask. A cable modem MAC address look up is performed first with instances containing this attribute value not null, if several entries match, the largest consecutive bit match from MSB to LSB is used." DEFVAL { 'FFFFFFFFFFFF'H } ::= { docsLoadbal3RestrictCmCfgEntry 3 } docsLoadbal3RestrictCmCfgGrpId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The attribute represents the Restricted Load Balancing Group identifier of this entry associated with the cable modem MAC address - MAC address mask combination. The value zero indicates that the instance is matched only against the ServiceTypeId value." DEFVAL { 0 } ::= { docsLoadbal3RestrictCmCfgEntry 4 } docsLoadbal3RestrictCmCfgServiceTypeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the Service Type Id associated with this cable modem MAC address - MAC Address mask combination.. The zero-length string indicates that the instance is matched only against the GrpId value, if both GrpId and this attribute are not present the instance is ignored for matching purposes." DEFVAL { "" } ::= { docsLoadbal3RestrictCmCfgEntry 5 } docsLoadbal3RestrictCmCfgStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of this conceptual object. There is no restriction on setting columns in this table any time." ::= { docsLoadbal3RestrictCmCfgEntry 6 } docsLoadbal3PolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3PolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the set of load balancing policies. Instances from this object might be referenced by GrpStatus object. All the rules contained in a load balancing policy apply to an Autonomous Load Balancing operations. Load balancing rules are defined within this specification or can be vendor-defined as well." ::= { docsLoadbal3MibObjects 10} docsLoadbal3PolicyEntry OBJECT-TYPE SYNTAX DocsLoadbal3PolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3Policy. The CMTS MUST persist all instances of Policy object across reinitializations." INDEX { docsLoadbal3PolicyId,docsLoadbal3PolicyRuleId } ::= { docsLoadbal3PolicyTable 1 } DocsLoadbal3PolicyEntry ::= SEQUENCE { docsLoadbal3PolicyId Unsigned32, docsLoadbal3PolicyRuleId Unsigned32, docsLoadbal3PolicyPtr RowPointer, docsLoadbal3PolicyRowStatus RowStatus } docsLoadbal3PolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the identifier of a load balancing policy." ::= { docsLoadbal3PolicyEntry 1 } docsLoadbal3PolicyRuleId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents a rule contained within a balancing policy." ::= { docsLoadbal3PolicyEntry 2 } docsLoadbal3PolicyPtr OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents a reference to an instance in a rule or other policy object like BasicRule object." ::= { docsLoadbal3PolicyEntry 3 } docsLoadbal3PolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The conceptual row status of this object." ::= { docsLoadbal3PolicyEntry 4 } docsLoadbal3BasicRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3BasicRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents a basic ruleset applicable to a load balancing policy that references it. " ::= { docsLoadbal3MibObjects 11} docsLoadbal3BasicRuleEntry OBJECT-TYPE SYNTAX DocsLoadbal3BasicRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsLoadbal3BasicRule. The CMTS MUST persist all instances of BasicRule object across reinitializations." INDEX { docsLoadbal3BasicRuleId } ::= { docsLoadbal3BasicRuleTable 1 } DocsLoadbal3BasicRuleEntry ::= SEQUENCE { docsLoadbal3BasicRuleId Unsigned32, docsLoadbal3BasicRuleEnable INTEGER, docsLoadbal3BasicRuleDisStart Unsigned32, docsLoadbal3BasicRuleDisPeriod Unsigned32, docsLoadbal3BasicRuleRowStatus RowStatus } docsLoadbal3BasicRuleId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents a unique identifier for balancing ruleset of this object." ::= { docsLoadbal3BasicRuleEntry 1 } docsLoadbal3BasicRuleEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), disabledPeriod(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute when set to 'enabled' enables Autonomous Load Balancing (independently of the load balancing group enable/disable state), the rule set is disabled if set to 'disabled', or is disabled during a period of time it set to 'disabledPeriod'." DEFVAL { disabled } ::= { docsLoadbal3BasicRuleEntry 2 } docsLoadbal3BasicRuleDisStart OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute disables load balancing from the time stated by this attribute when the attribute Enable is set to 'disablePeriod'. The time is defined in seconds since midnight." DEFVAL { 0 } ::= { docsLoadbal3BasicRuleEntry 3 } docsLoadbal3BasicRuleDisPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute disables load balancing until the time stated by this attribute when the attribute Enable is set to 'disablePeriod'. The time is defined in seconds of the wall clock since midnight. " DEFVAL { 0 } ::= { docsLoadbal3BasicRuleEntry 4 } docsLoadbal3BasicRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The conceptual row status of this object." ::= { docsLoadbal3BasicRuleEntry 5 } docsLoadbal3MibConformance OBJECT IDENTIFIER ::= { docsLoadbal3Mib 2 } docsLoadbal3MibCompliances OBJECT IDENTIFIER ::= { docsLoadbal3MibConformance 1 } docsLoadbal3MibGroups OBJECT IDENTIFIER ::= { docsLoadbal3MibConformance 2 } docsLoadbal3Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for..." MODULE -- this MODULE MANDATORY-GROUPS { docsLoadbal3Group } ::= { docsLoadbal3MibCompliances 1 } docsLoadbal3Group OBJECT-GROUP OBJECTS { docsLoadbal3SystemEnable, docsLoadbal3SystemEnableError, docsLoadbal3PolicyPtr, docsLoadbal3PolicyRowStatus, docsLoadbal3BasicRuleEnable, docsLoadbal3BasicRuleDisStart, docsLoadbal3BasicRuleDisPeriod, docsLoadbal3BasicRuleRowStatus, docsLoadbal3ChgOverGroupMacAddress, docsLoadbal3ChgOverGroupInitTech, docsLoadbal3ChgOverGroupForceUCC, docsLoadbal3ChgOverGroupdownFrequency, docsLoadbal3ChgOverGroupMdIfIndex, docsLoadbal3ChgOverGroupRcpId, docsLoadbal3ChgOverGroupRccId, docsLoadbal3ChgOverGroupUsChSet, docsLoadbal3ChgOverGroupServiceFlowInfo, docsLoadbal3ChgOverGroupTransactionId, docsLoadbal3ChgOverGroupCommit, docsLoadbal3ChgOverGroupLastCommit, docsLoadbal3ChgOverStatusMacAddr, docsLoadbal3ChgOverStatusInitTech, docsLoadbal3ChgOverStatusDownFrequency, docsLoadbal3ChgOverStatusMdIfIndex, docsLoadbal3ChgOverStatusRcpId, docsLoadbal3ChgOverStatusRccId, docsLoadbal3ChgOverStatusUsChSet, docsLoadbal3ChgOverStatusServiceFlowInfo, docsLoadbal3ChgOverStatusCmd, docsLoadbal3ChgOverStatusTransactionId, docsLoadbal3ChgOverStatusValue, docsLoadbal3ChgOverStatusUpdate, docsLoadbal3CmtsCmParamsProvGrpId, docsLoadbal3CmtsCmParamsCurrentGrpId, docsLoadbal3CmtsCmParamsProvServiceTypeID, docsLoadbal3CmtsCmParamsCurrentServiceTypeID, docsLoadbal3CmtsCmParamsPolicyId, docsLoadbal3CmtsCmParamsPriority, docsLoadbal3GeneralGrpDefaultsEnable, docsLoadbal3GeneralGrpDefaultsPolicyId, docsLoadbal3GeneralGrpDefaultsInitTech, docsLoadbal3GeneralGrpCfgEnable, docsLoadbal3GeneralGrpCfgPolicyId, docsLoadbal3GeneralGrpCfgInitTech, docsLoadbal3ResGrpCfgMdIfIndex, docsLoadbal3ResGrpCfgDsChList, docsLoadbal3ResGrpCfgUsChList, docsLoadbal3ResGrpCfgEnable, docsLoadbal3ResGrpCfgInitTech, docsLoadbal3ResGrpCfgPolicyId, docsLoadbal3ResGrpCfgServiceTypeId, docsLoadbal3ResGrpCfgStatus, docsLoadbal3GrpStatusCfgIdOrZero, docsLoadbal3GrpStatusMdIfIndex, docsLoadbal3GrpStatusMdCmSgId, docsLoadbal3GrpStatusDsChList, docsLoadbal3GrpStatusUsChList, docsLoadbal3GrpStatusEnable, docsLoadbal3GrpStatusInitTech, docsLoadbal3GrpStatusPolicyId, docsLoadbal3GrpStatusChgOverSuccess, docsLoadbal3GrpStatusChgOverFails, docsLoadbal3RestrictCmCfgMacAddr, docsLoadbal3RestrictCmCfgMacAddrMask, docsLoadbal3RestrictCmCfgGrpId, docsLoadbal3RestrictCmCfgServiceTypeId, docsLoadbal3RestrictCmCfgStatus } STATUS current DESCRIPTION "Group of objects implemented in" ::= { docsLoadbal3MibGroups 1 } END