DOCS-RPHY-CTRL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI -- RFC 2578 TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC 4001 docsRphyRpdDevInfoUniqueId FROM DOCS-RPHY-MIB clabProjDocsis FROM CLAB-DEF-MIB; docsRphyCtrlMib MODULE-IDENTITY LAST-UPDATED "201804120000Z" -- April 12, 2018 ORGANIZATION "Cable Television Laboratories, Inc" CONTACT-INFO " Postal: Cable Television Laboratories, Inc. 400 Centennial Parkway Louisville, Colorado 80027-1266 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: mibs@cablelabs.com" DESCRIPTION "This MIB module contains the control management objects for the Remote PHY Device (RPD) management. Copyright 2017-2018 Cable Television Laboratories, Inc. All rights reserved." REVISION "201804120000Z" -- April 12, 2018 DESCRIPTION "Revised Version includes ECN DOCS-RPHY-CTRL-MIB-N-18.1893-2." REVISION "201708030000Z" -- August 3, 2017 DESCRIPTION "Revised Version includes ECN DOCS-RPHY-CTRL-MIB-N-17.1752-2." REVISION "201704130000Z" -- April 13, 2017 DESCRIPTION "Initial version, created by R-OSSI-N-17.1707-2." ::= { clabProjDocsis 31 } -- --------------------------------------------------------- -- Textual Conventions -- --------------------------------------------------------- RphyResetCtrlType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type indicates the type of reset to be performed by the RPD." REFERENCE "" SYNTAX INTEGER { softReset(1), hardReset(2), nvReset(3), factoryReset(4) } RphySsdTransportType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type indicates the type of transport for the RPD download of the software file." REFERENCE "" SYNTAX INTEGER { tftp(1), http(2) } RphySsdAdminControlType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type describes values for the CCAP Core to maintain control over the SSD process." REFERENCE "" SYNTAX INTEGER { other(1), startSsd(2), abortSsd(3) } RphySsdStatusType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type describes the status of the SSD process in the RPD." REFERENCE "" SYNTAX INTEGER { other(1), idle(2), inProgress(3), cvcVerified(4), cvcRejected(5), codeFileVerified(6), codeFileRejected(7) } RphyCrashDataFileControlType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type describes the action taken by the device regarding the file selected " REFERENCE "" SYNTAX INTEGER { other(1), upload(2), cancelUpload(3), deleteFile(4), uploadAndDelete(5) } RphyCrashDataServerControlProtocolType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type describes the protocol used during the upload." REFERENCE "" SYNTAX INTEGER { other(1), tftp(2), http(3) } -- --------------------------------------------------------------------- -- Main Groups -- --------------------------------------------------------------------- docsRphyCtrlNotifications OBJECT IDENTIFIER ::= { docsRphyCtrlMib 0} docsRphyCtrlObjects OBJECT IDENTIFIER ::= { docsRphyCtrlMib 1} docsRphyCtrlConformance OBJECT IDENTIFIER ::= { docsRphyCtrlMib 2} docsRphyCtrlRpdMibObjects OBJECT IDENTIFIER ::= { docsRphyCtrlObjects 1} docsRphyCtrlCompliances OBJECT IDENTIFIER ::= { docsRphyCtrlConformance 1 } docsRphyCtrlGroups OBJECT IDENTIFIER ::= { docsRphyCtrlConformance 2 } -- --------------------------------------------------------------------- -- Notification Objects -- --------------------------------------------------------------------- -- --------------------------------------------------------------------- -- CCAP Core RPD Group Objects -- --------------------------------------------------------------------- -- --------------------------------------------------------------------- -- RPD Reset Control Table -- --------------------------------------------------------------------- docsRphyCtrlRpdResetCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyCtrlRpdResetCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows an RPD to be reset remotely via GCP from the Principal CCAP Core." ::= { docsRphyCtrlRpdMibObjects 1 } docsRphyCtrlRpdResetCtrlEntry OBJECT-TYPE SYNTAX DocsRphyCtrlRpdResetCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsRphyCtrlRpdResetCtrlTable." INDEX { docsRphyRpdDevInfoUniqueId } ::= { docsRphyCtrlRpdResetCtrlTable 1 } DocsRphyCtrlRpdResetCtrlEntry ::= SEQUENCE { docsRphyCtrlRpdResetCtrlReset RphyResetCtrlType } docsRphyCtrlRpdResetCtrlReset OBJECT-TYPE SYNTAX RphyResetCtrlType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows a reset of the RPD to be commanded. Reading this attribute always returns a value of softReset. The following reset states are supported: softReset(1) : The device performs a soft reset and clears the volatile downloaded configuration. hardReset(2) : The device performs a power-on reset and clears the volatile downloaded configuration. nvReset(3) : The device clears most non-volatile configuration and performs a hard reset. Refer to [R-PHY] for details on which configuration attributes are cleared. factoryReset(4): The device restores the factory configuration and performs a hard reset." ::= { docsRphyCtrlRpdResetCtrlEntry 1 } -- --------------------------------------------------------------------- -- RPD Log Control Table -- --------------------------------------------------------------------- docsRphyCtrlRpdLogCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyCtrlRpdLogCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides RPD log management functions." ::= { docsRphyCtrlRpdMibObjects 2 } docsRphyCtrlRpdLogCtrlEntry OBJECT-TYPE SYNTAX DocsRphyCtrlRpdLogCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsRphyRpdLogCtrlTable." INDEX { docsRphyRpdDevInfoUniqueId } ::= { docsRphyCtrlRpdLogCtrlTable 1 } DocsRphyCtrlRpdLogCtrlEntry ::= SEQUENCE { docsRphyCtrlRpdResetLog BITS } docsRphyCtrlRpdResetLog OBJECT-TYPE SYNTAX BITS { localEventLog(0), eventPendingQueue(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls resetting an RPD's local event log and/or the pending event queue. Reading this value returns the value zero. Setting an individual bit to 1 resets the corresponding RPD log or queue." ::= { docsRphyCtrlRpdLogCtrlEntry 1 } -- --------------------------------------------------------------------- -- RPD SSD Control Table -- --------------------------------------------------------------------- docsRphyCtrlRpdSsdCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyCtrlRpdSsdCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes secure software downloads of software running on RPDs." ::= { docsRphyCtrlRpdMibObjects 3 } docsRphyCtrlRpdSsdCtrlEntry OBJECT-TYPE SYNTAX DocsRphyCtrlRpdSsdCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsRphyCtrlRpdSsdCtrlTable." INDEX { docsRphyRpdDevInfoUniqueId } ::= { docsRphyCtrlRpdSsdCtrlTable 1 } DocsRphyCtrlRpdSsdCtrlEntry ::= SEQUENCE { docsRphyCtrlRpdSsdCtrlServerAddressType InetAddressType, docsRphyCtrlRpdSsdCtrlServerAddress InetAddress, docsRphyCtrlRpdSsdCtrlTransport RphySsdTransportType, docsRphyCtrlRpdSsdCtrlFilename SnmpAdminString, docsRphyCtrlRpdSsdCtrlManufCvcChain OCTET STRING, docsRphyCtrlRpdSsdCtrlCosignerCvcChain OCTET STRING, docsRphyCtrlRpdSsdCtrlAdminControl RphySsdAdminControlType, docsRphyCtrlRpdSsdCtrlStatus RphySsdStatusType, docsRphyCtrlRpdSsdCtrlSwImageIndex Unsigned32 } docsRphyCtrlRpdSsdCtrlServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the IP address type of the server. This value is of type InetAddressType, which is defined by [RFC 4001]." ::= { docsRphyCtrlRpdSsdCtrlEntry 1 } docsRphyCtrlRpdSsdCtrlServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the SSD server in the form of IPv4 or IPv6 address." ::= { docsRphyCtrlRpdSsdCtrlEntry 2 } docsRphyCtrlRpdSsdCtrlTransport OBJECT-TYPE SYNTAX RphySsdTransportType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute communicates the type of transport for the RPD download of the software file. The supported transports are TFTP and HTTP." ::= { docsRphyCtrlRpdSsdCtrlEntry 3 } docsRphyCtrlRpdSsdCtrlFilename OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to communicate the name of the software file that the RPD needs to download." ::= { docsRphyCtrlRpdSsdCtrlEntry 4 } docsRphyCtrlRpdSsdCtrlManufCvcChain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to communicate the certificate chain from the new PKI that contains both the Manufacturer Code Verification Certificate and the certification authority (CA) certificate that issued the Manufacturer Code Verification Certificate for Secure Software Download. The Manufacturer CVC Chain TLV (M-CVC-C) is used to enable the RPD to download the code file from the download server." ::= { docsRphyCtrlRpdSsdCtrlEntry 5 } docsRphyCtrlRpdSsdCtrlCosignerCvcChain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to communicate the certificate chain from the new PKI that contains both the Co-signer Code Verification Certificate and the certification authority (CA) certificate that issued the Co-signer Code Verification Certificate for Secure Software Download. The Co-signer CVC Chain TLV (C-CVC-C) is used to enable the RPD to download the code file from the download server." ::= { docsRphyCtrlRpdSsdCtrlEntry 6 } docsRphyCtrlRpdSsdCtrlAdminControl OBJECT-TYPE SYNTAX RphySsdAdminControlType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the CCAP Core to maintain control over the SSD process. When read, this attribute returns other. " ::= { docsRphyCtrlRpdSsdCtrlEntry 7 } docsRphyCtrlRpdSsdCtrlStatus OBJECT-TYPE SYNTAX RphySsdStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the status of the SSD process in the RPD. It reports a value of idle(2) after a reboot." ::= { docsRphyCtrlRpdSsdCtrlEntry 8 } docsRphyCtrlRpdSsdCtrlSwImageIndex OBJECT-TYPE SYNTAX Unsigned32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the software image that is the target of secure software download. The CCAP Core can select the Main Software Image (MSI) or any other image that the RPD reports as upgradeable by SSD." ::= { docsRphyCtrlRpdSsdCtrlEntry 9 } -- --------------------------------------------------------------------- -- RPD Crash Data File Control Table -- --------------------------------------------------------------------- docsRphyCtrlRpdCrashDataFileCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyCtrlRpdCrashDataFileCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides CCAP Core control attributes needed to initiate an RPD upload of a crash analysis file to the Server" ::= { docsRphyCtrlRpdMibObjects 4 } docsRphyCtrlRpdCrashDataFileCtrlEntry OBJECT-TYPE SYNTAX DocsRphyCtrlRpdCrashDataFileCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsRphyCtrlRpdCrashDataFileCtrlTable." INDEX { docsRphyRpdDevInfoUniqueId, docsRphyCtrlRpdCrashDataFileCtrlIndex } ::= { docsRphyCtrlRpdCrashDataFileCtrlTable 1 } DocsRphyCtrlRpdCrashDataFileCtrlEntry ::= SEQUENCE { docsRphyCtrlRpdCrashDataFileCtrlIndex Unsigned32, docsRphyCtrlRpdCrashDataFileCtrlFileControl RphyCrashDataFileControlType } docsRphyCtrlRpdCrashDataFileCtrlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key attribute uniquely identifies a particular device crash analysis file." ::= { docsRphyCtrlRpdCrashDataFileCtrlEntry 1 } docsRphyCtrlRpdCrashDataFileCtrlFileControl OBJECT-TYPE SYNTAX RphyCrashDataFileControlType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the action taken by the device regarding the file selected by Index attribute. When a value is written to this attribute for a given instance of the RpdCrashDataFileCtrl object, the device is required to take that action on the associated crash data file. Possible actions are: other(1): This value is returned when the attribute is read. This value is not writeable. upload(2): If the FileControl attribute of the RpdCrashDataFileCtrl object is set to 'upload', the CCAP Core MUST signal the RPD to initiate an upload to the server with the parameters specified in the 'DestIpAddr', 'DestIpAddrType', and 'DestPath' attributes of the RpdCrashDataServerCtrl object. cancelUpload(3): If the FileControl attribute of the RpdCrashDataFileCtrl object is set to 'cancelUpload', the CCAP Core MUST signal the RPD to cancel a pending upload. deleteFile(4): If the FileControl attribute of the RpdCrashDataFileCtrl object is set to 'deleteFile', the CCAP Core MUST signal the RPD to delete the file from its memory. uploadAndDelete(5): If the FileControl attribute of the RpdCrashDataFileCtrl object is set to 'uploadAndDelete', the CCAP Core MUST signal the RPD to upload the selected file and upon successful completion of the upload, delete the file from its memory." ::= { docsRphyCtrlRpdCrashDataFileCtrlEntry 2 } -- --------------------------------------------------------------------- -- RPD Crash Data Server Control Table -- --------------------------------------------------------------------- docsRphyCtrlRpdCrashDataServerCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyCtrlRpdCrashDataServerCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the CCAP Core control attributes needed by the RPD to describe the upload server for crash analysis files" ::= { docsRphyCtrlRpdMibObjects 5 } docsRphyCtrlRpdCrashDataServerCtrlEntry OBJECT-TYPE SYNTAX DocsRphyCtrlRpdCrashDataServerCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsRphyCtrlRpdCrashDataServerCtrlTable." INDEX { docsRphyRpdDevInfoUniqueId } ::= { docsRphyCtrlRpdCrashDataServerCtrlTable 1 } DocsRphyCtrlRpdCrashDataServerCtrlEntry ::= SEQUENCE { docsRphyCtrlRpdCrashDataServerCtrlDestIpAddrType InetAddressType, docsRphyCtrlRpdCrashDataServerCtrlDestIpAddr InetAddress, docsRphyCtrlRpdCrashDataServerCtrlDestPath SnmpAdminString, docsRphyCtrlRpdCrashDataServerCtrlProtocol RphyCrashDataServerControlProtocolType } docsRphyCtrlRpdCrashDataServerCtrlDestIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the IP address type of the server. This value is of type InetAddressType, which is defined by [RFC 4001]. A successful connection depends on the value of this attribute being set to an IP version provisioned on the device. For example, if this value is set to IPv6 and the device is provisioned for IPv4-only operation, a successful upload will not be possible. In this case the FileStatus attribute in the RpdCrashDataFileStatus object would reflect the error." ::= { docsRphyCtrlRpdCrashDataServerCtrlEntry 1 } docsRphyCtrlRpdCrashDataServerCtrlDestIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the IP address of the server to which the crash analysis file is to be sent." ::= { docsRphyCtrlRpdCrashDataServerCtrlEntry 2 } docsRphyCtrlRpdCrashDataServerCtrlDestPath OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the path, excluding the filename, at the server to which the crash analysis file is to be sent. By default, the value of this attribute is an empty string. If used, this value includes all expected delimiters." ::= { docsRphyCtrlRpdCrashDataServerCtrlEntry 3 } docsRphyCtrlRpdCrashDataServerCtrlProtocol OBJECT-TYPE SYNTAX RphyCrashDataServerControlProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the IP address of the server to which the crash analysis file is to be sent." ::= { docsRphyCtrlRpdCrashDataServerCtrlEntry 4 } -- --------------------------------------------------------------------- -- RPD Init Provisioning Control Table -- --------------------------------------------------------------------- docsRphyCtrlRpdInitProvCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyCtrlRpdInitProvCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the asset ID, device alias, and location of the RPD to be updated by the operator once an RPD is authenticated to the CCAP Core. Generally, the values of these attributes are provisioned on the RPD as part of the staging or installation process. However, there could be occasions when an operator needs to update these values on an RPD that is already in service." ::= { docsRphyCtrlRpdMibObjects 6 } docsRphyCtrlRpdInitProvCtrlEntry OBJECT-TYPE SYNTAX DocsRphyCtrlRpdInitProvCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsRphyCtrlRpdInitProvCtrlTable." INDEX { docsRphyRpdDevInfoUniqueId } ::= { docsRphyCtrlRpdInitProvCtrlTable 1 } DocsRphyCtrlRpdInitProvCtrlEntry ::= SEQUENCE { docsRphyCtrlRpdInitProvCtrlAssetId SnmpAdminString, docsRphyCtrlRpdInitProvCtrlDeviceAlias SnmpAdminString, docsRphyCtrlRpdInitProvCtrlLocationDescription SnmpAdminString, docsRphyCtrlRpdInitProvCtrlGeoLocationLatitude SnmpAdminString, docsRphyCtrlRpdInitProvCtrlGeoLocationLongitude SnmpAdminString } docsRphyCtrlRpdInitProvCtrlAssetId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to communicate the asset tracking identifier as assigned by a network manager. When this attribute is written, the RPD stores its value in its non-volatile configuration." ::= { docsRphyCtrlRpdInitProvCtrlEntry 1 } docsRphyCtrlRpdInitProvCtrlDeviceAlias OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute communicates a device name assigned by the operator via management interface. This attribute is an 'alias' name for the device as specified by a network manager, and provides a non-volatile 'handle' for the RPD. When this attribute is written, the RPD stores its value in its non-volatile configuration." ::= { docsRphyCtrlRpdInitProvCtrlEntry 2 } docsRphyCtrlRpdInitProvCtrlLocationDescription OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows a short text description to be written to the RPD describing where the RPD has been installed, such as a street address. The format is specific to the operator. When this attribute is written, the RPD stores its value in its non-volatile configuration." ::= { docsRphyCtrlRpdInitProvCtrlEntry 3 } docsRphyCtrlRpdInitProvCtrlGeoLocationLatitude OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(9)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the latitude portion of the RPD's geographic location to be written to the RPD. It consists of a 9-byte string formatted as specified in ISO 6709-2008. The RPD uses '6-digit notation' in the format: deg, min, sec, +/-DDMMSS.S (for example: '-750015.1'). A value of +000000.0 indicates that the latitude is not set. When this attribute is written, the RPD stores its value in its non-volatile configuration." ::= { docsRphyCtrlRpdInitProvCtrlEntry 4 } docsRphyCtrlRpdInitProvCtrlGeoLocationLongitude OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(10)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the longitude portion of the RPD's geographic location to be written to the RPD. It consists of a 10-byte long string formatted as specified in ISO 6709-2008. The RPD uses '7-digit notation' in the format: deg, min, sec, +/-DDDMMSS.S (for example: '-0100015.1'). A value of +0000000.0 indicates that the longitude is not set. When this attribute is written, the RPD stores its value in its non-volatile configuration." ::= { docsRphyCtrlRpdInitProvCtrlEntry 5 } -- --------------------------------------------------------- -- Conformance definitions -- --------------------------------------------------------- docsRphyCtrlCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RPD control features." MODULE -- docsRphyCtrlMib -- conditionally mandatory groups GROUP docsRphyCtrlRpdGroup DESCRIPTION "Group of objects applicable to RPDs only. These objects are implemented on the CCAP Core but are managed on the RPD via the GCP protocol." -- conditionally optional groups ::= { docsRphyCtrlCompliances 1} docsRphyCtrlRpdGroup OBJECT-GROUP OBJECTS { docsRphyCtrlRpdResetCtrlReset, docsRphyCtrlRpdResetLog, docsRphyCtrlRpdSsdCtrlServerAddressType, docsRphyCtrlRpdSsdCtrlServerAddress, docsRphyCtrlRpdSsdCtrlTransport, docsRphyCtrlRpdSsdCtrlFilename, docsRphyCtrlRpdSsdCtrlManufCvcChain, docsRphyCtrlRpdSsdCtrlCosignerCvcChain, docsRphyCtrlRpdSsdCtrlAdminControl, docsRphyCtrlRpdSsdCtrlStatus, docsRphyCtrlRpdSsdCtrlSwImageIndex, docsRphyCtrlRpdCrashDataFileCtrlFileControl, docsRphyCtrlRpdCrashDataServerCtrlDestIpAddrType, docsRphyCtrlRpdCrashDataServerCtrlDestIpAddr, docsRphyCtrlRpdCrashDataServerCtrlDestPath, docsRphyCtrlRpdCrashDataServerCtrlProtocol, docsRphyCtrlRpdInitProvCtrlAssetId, docsRphyCtrlRpdInitProvCtrlDeviceAlias, docsRphyCtrlRpdInitProvCtrlLocationDescription, docsRphyCtrlRpdInitProvCtrlGeoLocationLatitude, docsRphyCtrlRpdInitProvCtrlGeoLocationLongitude } STATUS current DESCRIPTION "Group of control objects implemented in CCAP Cores which represent RPD control objects managed via the GCP protocol." ::= { docsRphyCtrlGroups 1 } END